Hi all,
I recently switched from a Duron 1200 that has been running for years to
a MW525.
I thought by this time several problems would have been fixed.
I'm still using tklinuxcnc but have plans to shift to gmocapy. I love
the features in axis but do not
interface well with the UI.
dave@linuxcnc:~$ uname -a
Linux linuxcnc 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc
i686 i686 i386 GNU/Linux
a. to work reliably on startup G40 must be on a line by itself. The only
time this is a real problem is
when I am using hand written code and it quits of get canceled before
the G40. I don't know if this
is a gui problem or can be traced back to the interp.
b. The offsets are usually correct but the offset number often doesn't
display correctly.
It can display G54 but the offsets are for G55 and the program runs
correctly.
Once in a while no matter what I do the program cannot invoke either the
offsets or the correct
offset number.
c. minor but annoying ... in mdi I get an error message "cannot open
<filename>.
d. I've done no configuration in terms of isolcpu, etc. and occasionally
get cycle time violations. It is
my understanding that rtai doesn't need it.
Sorry to dump on you but things have finally gotten to the point where I
can't do any machining.
"b" has me completely stalled.
Gentle help would be appreciated.
Dave
ps. In desperation I would try axis (again) but clicking on the sample
configurations doesn't fill in the tree.
'a' and 'b' existed with the Duron also but I've never been this stalled.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
