On 06/25/2017 12:32 PM, Jon Elson wrote:
On 06/25/2017 09:21 AM, dave wrote:
.....warning: gcode exceeds machine limits. I classically set my
limits at -.2 ..18, -.2, ..9 and 0 ... -3.
Moving to -9 ... 9, -4 ... 4 for x and y and it still gave me the
same error message. .... and yes I shutdown linuxcnc and restarted
homing on the center of the bed.
I can't POSSIBLY see how temperature could affect soft limits, which
is what your message describes. The only way this could happen is
computer malfunction or homing to a different spot than was intended
for home.
For right now I suspect cpu temp.
Homing is manual and I know rather well where each axis is when I home.
Lots of things to look at...........
Dave
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users