On 12/23/2018 03:16 PM, Gene Heskett wrote:
On Sunday 23 December 2018 16:00:01 Jon Elson wrote:
On 12/23/2018 01:26 PM, Gene Heskett wrote:
I sort of like that, 23 ft of head would let me put the tank below
the machine, but it appears the motor may not be cooled by the
coolant, does that have any effect on its life? And its 9" tall.
But that would let me mount it below the machine and toward the
front of the cabinet, making an lcd thermometer stuck to it more
easily seen.
On this sort of pump, the motor is AIR cooled, but you have
to keep water from splashing on the motor.
There are no shaft seals,
Ouch
the vertical motor shaft just
passes through the top of the pump housing, and the water
enters from the bottom.
Stable mount required then. Can that pump be dissed so that it could be
stuck thru the lid of the container & reassembled?
May not have to do that. See last picture here :
http://pico-systems.com/CNCconv.html
It is hard to tell, but there's a clear Plexi cover with a
hole it it for the pump motor to stick out through.
The pump can be disassembled, I do it for cleaning every
once in a while.
Jon
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
