On Saturday 23 February 2019 17:39:04 Gene Heskett wrote: Trying to get control over this @#&%$#)* Chinese vfd.
Found a doc that I think applies to the clone vfd thats running my Sheldon, it shows all the control buttons as making ground contact to exert the control, so I rewire the 7i76 to do that. But this thing ignores the fwd and rev signals, responding only to the voltage sent to the spinout terminal. I've now done everything in the way of control combo's and the only way I get a response is if its stopped, but the fwd led on it panel is on, then it will run fwd only. at whatever speed lcnc asks for. And thats disabled if the last button push on the local panel is stop, the last button pushed must be run. If I switch it to MANual, it runs wide open, ignoring the speed knob setting. Why did they plainly mark the control strip with fwd and rev if they have no effect? Theres one register that supposedly controls how thats supposed to work, also has no effect. d091. Has anyone actually made the 1500 watt spindle in the bigger 6040 gantry mill actually work?with LCNC? > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
