On Wednesday 18 March 2020 13:08:35 Jon Elson wrote: > On 03/17/2020 11:34 PM, Leonardo Marsaglia wrote: > > The behaviour is the following: When I start LinuxCNC and move the > > axis I get the maximum speed 10.000 mm/min. Once I hit the home > > buttons for both axis (no limits linked yet since I'm testing the > > config) I get a 1.800 mm/min max velocity, although all the sliders > > are in the max velocity just as they where before homing. If I try > > to make a rapid move using MDI the same thing happens. > > In the .ini files of the later versions of LinuxCNC, there > are DIFFERENT MAX_VELOCITY parameters > for JOINTS and AXES. Before homing, you move joints, after > homing you move axes. You almost > certainly have different numbers in these different sections > of your .ini file. > > Jon
That would be somewhat handy Jon, but halchecker demands they match, so if i need to change it, I have always got two places to change? Some other option I need to define? Thanks Jon. > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
