On Wednesday 18 March 2020 14:48:59 Jon Elson wrote: > On 03/18/2020 01:11 PM, Gene Heskett wrote: > > On Wednesday 18 March 2020 13:08:35 Jon Elson wrote: > >> On 03/17/2020 11:34 PM, Leonardo Marsaglia wrote: > >>> The behaviour is the following: When I start LinuxCNC and move the > >>> axis I get the maximum speed 10.000 mm/min. Once I hit the home > >>> buttons for both axis (no limits linked yet since I'm testing the > >>> config) I get a 1.800 mm/min max velocity, although all the > >>> sliders are in the max velocity just as they where before homing. > >>> If I try to make a rapid move using MDI the same thing happens. > >> > >> In the .ini files of the later versions of LinuxCNC, there > >> are DIFFERENT MAX_VELOCITY parameters > >> for JOINTS and AXES. Before homing, you move joints, after > >> homing you move axes. You almost > >> certainly have different numbers in these different sections > >> of your .ini file. > >> > >> Jon > > > > That would be somewhat handy Jon, but halchecker demands they match, > > so if i need to change it, I have always got two places to change? > > Some other option I need to define? > > There's a third place, in the [TRAJ] section of the .ini > file. Since the split of [AXIS] and [JOINT] > I'm not sure whether the settings in the [TRAJ] section > affects both of the other places, or just > one. > I'm in that same boat Jon, but its axis and joint settings that it forces me to match or its showstopper exit at init time. I have wondered but haven't asked why it doesn't do away with the axis setting and use he joint for everything. But in that regard, I'm a big dummy.
> Jon > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
