On Tuesday 02 June 2020 04:06:16 andy pugh wrote: > On Tue, 2 Jun 2020 at 01:22, Gene Heskett <ghesk...@shentel.net> wrote: > > The controller has an empty u-sd socket and a smallish usb > > > > port, looks like an OTG port. Does anyone know what thats about? > > No other documentation came with it. > > Is there a CD with it? Or an SD card? They tend to provide docs that > way rather than on paper.
u-sd card. I found some docs on the net, but none of what the docs are talking about seem to be on the sd card. I took me about 2 hours to dismantle it and get all the cables routed, the another hour to get the crossbar square so the bed could actually be adjusted, then another hour to get pla installed, it flat refused to feed beyond the pinchers output guide, detecting a jam and backing out then trying again. Apparently forever. Finally cut the end at a high angle and spun it till it finally went it. No high speed feed, so it was another 20 minutes to get the shadow to the top of the extruder. It had a gcode file on the sd card so I started that but it was at 3% when the pla finally made it to the nozzle, but it bounced off the hot plate, making 6 or 7" of curly pigtail waving around. Hit stop. I think I'll see if I can get some sleep. I've heard of folks washing the bed with booze for better adhesion, but 45C doesn't appear to be warm enough for even that to work well.. How hot do others run the bed with PLA? Thanks Andy. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
