Me become old and stupid, maybe some good alcohol would dissolve some old thinking.
Looking closer on chuck and slit, to long and wrong shape. Neither of them fit with tool changer. I tried ISO40 (DIN2080) so now is the question if I should try BT40 (JIS B6339) or SK40 (DIN69871) or both. It still very good to know about the belleville stack, guess information will be useful sooner or later. Regards Nicklas Karlsson > If the belleville washer stack will not compress far enough to open the > fingers to allow the retention knob to enter then some of the belleville > washers have broken. The broken pieces will self arrange in layers. That > will mechanically restrict the collapse of the stack. > A new stack of washers is necessary. > Replace all the washers if you don't want to do this over and over. > Pay attention to the stack before you disassemble it and replicate the > stack. > Hth > Stuart > > On Sun, Jun 14, 2020, 8:34 AM N <nicklas.karlsso...@gmail.com> wrote: > > > > On Sun, 7 Jun 2020 at 14:47, N <nicklas.karlsso...@gmail.com> wrote: > > > > > > > Modig MD6000. > > > > > > > > > > There is one here doing tool-changes with LinuxCNC. > > > https://www.youtube.com/watch?v=SkAjD2iKizU > > > It isn't clear from the noises if it is a hydraulic or pneumatic clamp... > > > > > > But, this message on the forum from the same chap says that the clamp is > > > hydraulic: > > > > > https://forum.linuxcnc.org/24-hal-components/29153-vmc-related-hal-questions?start=110#67391 > > > > Tried it today but still could not get chuck inside. Hydraulic pump had > > some effect, applying valve on hydraulic and chuck stuck even though not > > fully inside and could be released by pumping up pressure but with only tip > > locked on inside it can't work. Guess I have to disassemble to figure out > > what might be wrong. > > > > > > Regards Nickklas Karlsson > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
