On Sun, 21 Jun 2020 at 16:11, N <nicklas.karlsso...@gmail.com> wrote:
> > Looking closer on chuck and slit, to long and wrong shape. Neither of them > fit with tool changer. I tried ISO40 (DIN2080) so now is the question if I > should try BT40 (JIS B6339) or SK40 (DIN69871) or both. There is a risk of damaging the petal clamp if a pull-stud of the wrong angle is used. I think you need to take the washer stack and petal clamp out see what you have. But one alternative might be to form modelling clay around a stick on the end of a holder with no pull stud, to see what shape it pushes the clay in to. (And then when the clay gets stuck in the petals you have no choice but to strip it all down for inspection) It might be easy. On my home-made drawbar the entire thing just lifts out: https://youtu.be/pxrzJ_KfcQ0?t=23 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
