What's the thingiverse link again? Quite a number of these things on there. All
messages with it have flushed from Yahoo's trash folder. Now my interest is
piqued more and I want to see the models you're working with.
On Monday, August 24, 2020, 7:54:55 PM MDT, Gene Heskett
<[email protected]> wrote:
On Monday 24 August 2020 19:43:22 Thaddeus Waldner wrote:
> A print with sturdy walls and mostly hollow interior describes a
> diaphragm structure. This is great for when you need a stiff part, but
> not so great for flex. What you need to do to get maximum strength and
> flexibility is to print the flex part solid and thin it from the
> outside.
>
My version would be a bit more OOTB, to thin the base to add more flex to
the bottom of this cup. But I'm still figuring out cura. The walls being
flexed seems to translate to an up and down deformation of the bottom of
this "cup" and a thinner bottom might reduce the strain on the sidewall
junction where it usually breaks. Done and resliced. The current copy
I'm about to kill is bridging the bolt holes. There is nothing above
them, so why? Turned it off. Took 2 layers out of the bottom, I think.
With cura, who knows for sure? Anyway, its building. And about an hour
and change faster.
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
