Yes I wondered that Andy. Pncconf only had options for the 7i77 on first header. So I used that one.
Regards Andrew On Sun, Nov 22, 2020, 12:10 AM andy pugh <[email protected]> wrote: > On Sat, 21 Nov 2020 at 10:35, andrew beck <[email protected]> > wrote: > > > Now I want to update the firmware on the 5i25 so I can use it also > > I don't know if you worked it out, but the 5i25_7i76_7i77 (etc) > firmwares _do_ need the cards to be on the designated headers. > That is why you can find a 5i25_7i76_7i77.bit and a 5i25_7i77_7i76.bit > file in the firmware pack. > ( http://www.mesanet.com/software/parallel/5i25.zip ) > > > and want to try out the 7i84 I have and see if the smart serial works ok > > any thoughts guys? whats the easiest way > > Simplest is to chop one end off of a Cat5 cable, strip back the cores > and wire into the Smart Serial port on the 7i76. > (I am pretty sure that the 7i76 manual says which terminal block it > is, and which wire goes where) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
