On Thu, 1 Apr 2021 at 00:43, Gregg Eshelman via Emc-users < emc-users@lists.sourceforge.net> wrote:
I have all the technical info and some setup/configuration software for the > Animatics servo controller but nobody is interested in adding support to > LCNC. I am not sure that you have ever explicitly asked anyone to. I thought you were trying to do it yourself. > Basically it streams gcode out by serial and listens for ack and things > like hitting an end stop, monitoring the position encoders, and things that > will cause it to stop the machine Though this does sound like DNC to an embedded controller, which isn't usually considered a good fit for LinuxCNC. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users