Bary - Could we get all the files? custompanel.xml postgui_call_list.hal custom.hal
I just built RIP on buster and ran the config (remarking out the missing files) I have an encoder in pin 10 and 11 and it seems to work with no crash. sam On Thu, Sep 1, 2022 at 9:45 PM Bari <bari00...@gmail.com> wrote: > Brand new setup using stepconf. if I spin the spindle encoder quickly > by hand I get: rtapi_app: caught signal 8 - dumping core > > Even if the machine is still in e-stop. Simple config using stepconf > LINUXCNC - 2.9.0~pre0 > > All default settings other than manual edit of LPT base address and > changed setp encoder.0.position-scale 4000.000000 Default is like > 100 vs 4000 > > Any ideas what causes this error? > > https://forum.linuxcnc.org/media/kunena/attachments/1324/simple.ini > > https://forum.linuxcnc.org/media/kunena/attachments/1324/simple.hal > > The only mention of a similar error: > forum.linuxcnc.org/24-hal-components/358...hercat-lcec?start=10 > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
