If I can remember how to do a git bisect - I will try to figure out when it happened.. Probably won't happen till the weekend.
On Thu, Sep 1, 2022, 11:48 PM Bari <bari00...@gmail.com> wrote: > > https://forum.linuxcnc.org/49-basic-configuration/46796-rtapi-app-caught-signal-8-dumping-core > > All the files are here. ^^ > > On 9/1/22 22:42, Sam Sokolik wrote: > > Bary - Could we get all the files? > > custompanel.xml > > postgui_call_list.hal > > custom.hal > > > > I just built RIP on buster and ran the config (remarking out the missing > > files) > > I have an encoder in pin 10 and 11 and it seems to work with no crash. > > > > sam > > > > > > On Thu, Sep 1, 2022 at 9:45 PM Bari <bari00...@gmail.com> wrote: > > > >> Brand new setup using stepconf. if I spin the spindle encoder quickly > >> by hand I get: rtapi_app: caught signal 8 - dumping core > >> > >> Even if the machine is still in e-stop. Simple config using stepconf > >> LINUXCNC - 2.9.0~pre0 > >> > >> All default settings other than manual edit of LPT base address and > >> changed setp encoder.0.position-scale 4000.000000 Default is like > >> 100 vs 4000 > >> > >> Any ideas what causes this error? > >> > >> https://forum.linuxcnc.org/media/kunena/attachments/1324/simple.ini > >> > >> https://forum.linuxcnc.org/media/kunena/attachments/1324/simple.hal > >> > >> The only mention of a similar error: > >> forum.linuxcnc.org/24-hal-components/358...hercat-lcec?start=10 > >> > >> > >> > >> _______________________________________________ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
