in case that screenshot didn't come through https://electronicsam.com/images/emco/Screenshot%20from%202022-09-18%2015-43-25.png
On Sun, Sep 18, 2022 at 3:50 PM Sam Sokolik <samco...@gmail.com> wrote: > I have a optical encoder from a mouse running on an emco encoder wheel > (100 holes). I cut out the metal between 2 holes. I think that would be > considered one missing tooth... I have the encoder scale set to 100 and > the missing tooth set to 1 > > I have a little comp that sets the index enable to true whenever it is > false. > > Looking at the halscope screen shot - it only counts to 98.. I would > think it would count from 0 to 99. You can see the gap is seen - but I > think there should be an extra count in there.. > > (I could be not understanding it too) > > ps - if I set the missing teeth to 2 - it will not trigger (like it > doesn't see the gap then which seems correct) > > thanks! > sam > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users