This may be a bit wild but use pll and trigger when the expected pulse
doesn't appear. Maybe a bit far out of the box.
Basically the reverse of synchronous detection.
D
On 9/18/22 1:59 PM, Sam Sokolik wrote:
in case that screenshot didn't come through
https://electronicsam.com/images/emco/Screenshot%20from%202022-09-18%2015-43-25.png
On Sun, Sep 18, 2022 at 3:50 PM Sam Sokolik <samco...@gmail.com> wrote:
I have a optical encoder from a mouse running on an emco encoder wheel
(100 holes). I cut out the metal between 2 holes. I think that would be
considered one missing tooth... I have the encoder scale set to 100 and
the missing tooth set to 1
I have a little comp that sets the index enable to true whenever it is
false.
Looking at the halscope screen shot - it only counts to 98.. I would
think it would count from 0 to 99. You can see the gap is seen - but I
think there should be an extra count in there..
(I could be not understanding it too)
ps - if I set the missing teeth to 2 - it will not trigger (like it
doesn't see the gap then which seems correct)
thanks!
sam
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users