YAY
Thanks Phill !
now looking into fulfilling requirements on 2.9.0 on Buster
https://debian.pkgs.org/sid/debian-main-arm64/linuxcnc-uspace_2.9.0~pre1+git20230208.f1270d6ed7-1_arm64.deb.html
That was FAST , thanks
tomp
On 8/26/23 12:29, Phill Carter via Emc-users wrote:
It works on the current 2.9
On 26 Aug 2023, at 3:07 pm, Thomas J Powderly <tjt...@gmail.com> wrote:
Hello
I want to embed pyvcp into a tab of Axis interface.
My attempts so far got me the new tab
but the pyvcp panel ( or pyTkinter panel) is free floating.
The panel is not embedded,
There was a discussion about this on the forum
https://www.forum.linuxcnc.org/9-installing-linuxcnc/38996-new-install-now-cant-import-tkinter?start=10
There was no resolution, and the information provided suggested that an update
linuxcnc-uspace_2.9.0~pre1+git20230208.f1270d6ed7-1_amd64.deb
would help.
No one in the discussion reported that this actually worked.
So, before I update, could someone running 2.9.0
please do this test?
Put this dummy 'pyvcptab.xml' file into your
~/linuxcnc/configs/configYouWantToTry
-------------------- begin file pyvcptab.xml -----------------------
<?xml version='1.0' encoding='UTF-8'?>
<pyvcp>
<hbox>
<label>
<text>"Pyvcp Xml file in a Tab"</text>
</label>
</hbox>
<hbox>
<vbox>
<spinbox>
<halpin>"spbox1f"</halpin>
<min_>1</min_>
<max_>5000</max_>
<initval>1</initval>
<resolution>1</resolution>
<format>"4.0f"</format>
</spinbox>
<button>
<halpin>"spbox1verify"</halpin>
<text>"Run"</text>
</button>
</vbox>
</hbox>
</pyvcp>
-------------------- end file pyvcptab,xml -----------------------
and edit a working .ini to include this vvv after the [DISPLAY] maker
---------------------- begin edit your .ini ---------------------------
EMBED_TAB_NAME = PyvcpTab
EMBED_TAB_COMMAND = pyvcp pyvcptab.xml
---------------------- end edit your .ini ---------------------------
Then run LincCBC with yoour config and see if the tab appears
AND if the pyvcp widgets are on the tab or just in a free floationg pane.
There is no .hal file or stanza.
The hal pins are not connected.
That is not needed to test the tab feature.
in 2.8.0 it looks like the attached png
Thnaks TomP
<pyvcptab2.8.0.png><pyvcptab.xml>_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
