I suppose you could also install a 14-60 outlet and just cut the bottom (neutral) pin off your EVSE's 14-50 plug. I've done that on many 14-50 portable EVSE plugs, then it fits in a 14-30 Dryer outlet too. (this pin is not used on EVSEs) Just be sure and de-rate the breaker for safety. (Allowed under code)
On Sat, Apr 13, 2024 at 4:58 PM Bill Dube via EV <ev@lists.evdl.org> wrote: > I think the simplest would be to install a NEMA 14-60 with a 60 amp > breaker, and swap in a NEMA 14-60 cord cap on the charger. > > If you are over 50 amps, you are exempt from the NEC GFCI requirements, > even outdoors. A bit silly, but this is what the NEC rules say you can > do.... > > You could subsequently make a 14-60 to 14-50 adapter, but that would not > be legal.... > > Bill D. > > PS > > The trip limit of 5 mA on a North American GFCI is just plain silly. The > rest of the world sets the trip limit to 30 mA for GFCI (or "Residual > Current", as it is called elsewhere.) Hospitals, daycare centers, and > the like, have lower trip limits, which makes sense in those specific > locations. > > _______________________________________________ > Address messages to ev@lists.evdl.org > No other addresses in TO and CC fields > HELP: http://www.evdl.org/help/ > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20240413/4caa4d59/attachment.htm> _______________________________________________ Address messages to ev@lists.evdl.org No other addresses in TO and CC fields HELP: http://www.evdl.org/help/