I'm sure I'm close. Perhaps you can see something that jumps out at you. Here
is a copy of the config file and error log file.
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
Subsection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubsection
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or
other
# programs take long to start up, try moving the Type1 and Speedo
directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
Option "XkbVariant" "us"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IntelliMouse"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Monitor"
Identifier "monitor1"
HorizSync 30-97
VertRefresh 50-180
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563
-hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# This is a set of standard mode timings. Modes that are out of monitor
spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
ModeLine "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
ModeLine "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817
Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445
-HSync +VSync
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500
-HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
ModeLine "800x600" 40 800 840 968 1056 600 601 605 628
+hsync +vsync
# 640x480 @ 85 Hz, 43.27 kHz hsync
ModeLine "640x480" 36 640 696 752 832 480 481 484 509
-HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985
Interlace
# 800x600 @ 72 Hz, 48.0 kHz hsync
ModeLine "800x600" 50 800 856 976 1040 600 637 643 666
+hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
ModeLine "1024x768" 65 1024 1032 1176 1344 768 771 777 806
-hsync -vsync
# 640x480 @ 100 Hz, 53.01 kHz hsync
ModeLine "640x480" 45.8 640 672 768 864 480 488 494 530
-HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
ModeLine "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892
-HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
ModeLine "800x600" 60.75 800 864 928 1088 600 616 621 657
-HSync -VSync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806
-hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
ModeLine "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
Interlace
# 800x600 @ 100 Hz, 64.02 kHz hsync
ModeLine "800x600" 69.65 800 864 928 1088 600 604 610 640
-HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
ModeLine "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
ModeLine "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
ModeLine "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1400x1050 @ 60 Hz, 65.5 kHz
ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082
+HSync +VSync
# 1024x768 @ 85 Hz, 70.24 kHz hsync
ModeLine "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync
-VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
ModeLine "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068
-HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
ModeLine "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
ModeLine "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x1024 @ 75 Hz, 79.98 kHz hsync
ModeLine "1280x1024" 135 1280 1296 1440 1688 1024 1025 1028 1066
+HSync +VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
ModeLine "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802
-HSync -VSync
# 1400x1050 @ 75 Hz, 82.2 kHz hsync
ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090
+HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
ModeLine "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250
-HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
ModeLine "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902
-HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072
+HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
ModeLine "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244
+HSync +VSync
# 1600x1200 @ 85 Hz, 106.3 kHz hsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
ModeLine "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072
-HSync -VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490
+HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490
+HSync +VSync
# 1920x1440 @ 60 Hz, 90.0 kHz hsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500
-HSync +VSync
# 1920x1440 @ 75 Hz, 112.5kHz hsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500
-HSync +VSync
# 512x384 @ 78 Hz, 31.50 kHz hsync
ModeLine "512x384" 20.160 512 528 592 640 384 385 388 404
-HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
ModeLine "512x384" 22 512 528 592 640 384 385 388 404
-HSync -VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
ModeLine "320x200" 12.588 320 336 384 400 200 204 205 225
Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
ModeLine "320x240" 12.588 320 336 384 400 240 245 246 262
Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
ModeLine "320x240" 15.750 320 336 384 400 240 244 246 262
Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312
Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
ModeLine "400x300" 20 400 416 480 528 300 301 303 314
Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
ModeLine "400x300" 25 400 424 488 520 300 319 322 333
Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
ModeLine "480x300" 23.890 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
ModeLine "480x300" 25 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
ModeLine "480x300" 29.952 480 504 584 624 300 319 322 333
Doublescan
EndSection
Section "Device"
Identifier "device1"
BoardName "NVIDIA GeForce4 (generic)"
Option "power_saver"
EndSection
Section "Screen"
Driver "svga"
Device "device1"
Monitor "A110"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
EndSection
****************************************************************
Error log file:
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Sep 29 13:47:34 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "nvidia"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "A110"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000090, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 8086,1a30 rev 11 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 8086,24c2 rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 8086,24c2 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 8086,24c2 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1458,5004 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24cb card 8086,24c2 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 8086,24c2 rev 01 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0251 card 1462,8710 rev a3 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 109e,036e card 0070,13eb rev 11 class 04,00,00 hdr 80
(II) PCI: 02:01:1: chip 109e,0878 card 0070,13eb rev 11 class 04,80,00 hdr 80
(II) PCI: 02:04:0: chip 9004,8178 card 0000,0000 rev 00 class 01,00,00 hdr 00
(II) PCI: 02:07:0: chip 1106,3044 card 1458,1000 rev 46 class 0c,00,10 hdr 00
(II) PCI: 02:08:0: chip 8086,103a card 8086,3013 rev 81 class 02,00,00 hdr 00
(II) PCI: 02:0a:0: chip 1274,5880 card 1458,a000 rev 04 class 04,01,00 hdr 00
(II) PCI: 02:0c:0: chip 105a,5275 card 105a,1275 rev 01 class 01,04,85 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xc8000000 - 0xd7ffffff (0x10000000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[1] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[2] -1 0x00008800 - 0x000088ff (0x100) IX[B]
[3] -1 0x00008c00 - 0x00008cff (0x100) IX[B]
[4] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[5] -1 0x00009400 - 0x000094ff (0x100) IX[B]
[6] -1 0x00009800 - 0x000098ff (0x100) IX[B]
[7] -1 0x00009c00 - 0x00009cff (0x100) IX[B]
[8] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[9] -1 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[10] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[11] -1 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0xdc000000 - 0xdc0fffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0251) rev 163, Mem @
0xd8000000/24, 0xc8000000/27, 0xd0000000/19
(--) PCI: (2:1:0) BrookTree unknown chipset (0x036e) rev 17, Mem @
0xdc000000/12
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xdb000000 - 0xdb003fff (0x4000) MX[B]
[1] -1 0xdb005000 - 0xdb005fff (0x1000) MX[B]
[2] -1 0xdb004000 - 0xdb0047ff (0x800) MX[B]
[3] -1 0xdb006000 - 0xdb006fff (0x1000) MX[B]
[4] -1 0xdc001000 - 0xdc001fff (0x1000) MX[B]
[5] -1 0x20000000 - 0x200003ff (0x400) MX[B]
[6] -1 0xdc100000 - 0xdc1003ff (0x400) MX[B]
[7] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[8] -1 0xdc000000 - 0xdc000fff (0x1000) MX[B](B)
[9] -1 0xd0000000 - 0xd007ffff (0x80000) MX[B](B)
[10] -1 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
[12] -1 0x0000a000 - 0x0000a00f (0x10) IX[B]
[13] -1 0x00009c00 - 0x00009c03 (0x4) IX[B]
[14] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[15] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[16] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[17] -1 0x00008c00 - 0x00008c3f (0x40) IX[B]
[18] -1 0x00008800 - 0x0000883f (0x40) IX[B]
[19] -1 0x00008400 - 0x0000847f (0x80) IX[B]
[20] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[21] -1 0x00005000 - 0x0000501f (0x20) IX[B]
[22] -1 0x0000cc00 - 0x0000cc0f (0x10) IX[B]
[23] -1 0x0000c800 - 0x0000c803 (0x4) IX[B]
[24] -1 0x0000c400 - 0x0000c407 (0x8) IX[B]
[25] -1 0x0000c000 - 0x0000c003 (0x4) IX[B]
[26] -1 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[27] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[28] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[29] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdb000000 - 0xdb003fff (0x4000) MX[B]
[1] -1 0xdb005000 - 0xdb005fff (0x1000) MX[B]
[2] -1 0xdb004000 - 0xdb0047ff (0x800) MX[B]
[3] -1 0xdb006000 - 0xdb006fff (0x1000) MX[B]
[4] -1 0xdc001000 - 0xdc001fff (0x1000) MX[B]
[5] -1 0x20000000 - 0x200003ff (0x400) MX[B]
[6] -1 0xdc100000 - 0xdc1003ff (0x400) MX[B]
[7] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[8] -1 0xdc000000 - 0xdc000fff (0x1000) MX[B](B)
[9] -1 0xd0000000 - 0xd007ffff (0x80000) MX[B](B)
[10] -1 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[11] -1 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
[12] -1 0x0000a000 - 0x0000a00f (0x10) IX[B]
[13] -1 0x00009c00 - 0x00009c03 (0x4) IX[B]
[14] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[15] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[16] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[17] -1 0x00008c00 - 0x00008c3f (0x40) IX[B]
[18] -1 0x00008800 - 0x0000883f (0x40) IX[B]
[19] -1 0x00008400 - 0x0000847f (0x80) IX[B]
[20] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[21] -1 0x00005000 - 0x0000501f (0x20) IX[B]
[22] -1 0x0000cc00 - 0x0000cc0f (0x10) IX[B]
[23] -1 0x0000c800 - 0x0000c803 (0x4) IX[B]
[24] -1 0x0000c400 - 0x0000c407 (0x8) IX[B]
[25] -1 0x0000c000 - 0x0000c003 (0x4) IX[B]
[26] -1 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[27] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[28] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[29] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdb000000 - 0xdb003fff (0x4000) MX[B]
[6] -1 0xdb005000 - 0xdb005fff (0x1000) MX[B]
[7] -1 0xdb004000 - 0xdb0047ff (0x800) MX[B]
[8] -1 0xdb006000 - 0xdb006fff (0x1000) MX[B]
[9] -1 0xdc001000 - 0xdc001fff (0x1000) MX[B]
[10] -1 0x20000000 - 0x200003ff (0x400) MX[B]
[11] -1 0xdc100000 - 0xdc1003ff (0x400) MX[B]
[12] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[13] -1 0xdc000000 - 0xdc000fff (0x1000) MX[B](B)
[14] -1 0xd0000000 - 0xd007ffff (0x80000) MX[B](B)
[15] -1 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
[17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0x0000a000 - 0x0000a00f (0x10) IX[B]
[20] -1 0x00009c00 - 0x00009c03 (0x4) IX[B]
[21] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[24] -1 0x00008c00 - 0x00008c3f (0x40) IX[B]
[25] -1 0x00008800 - 0x0000883f (0x40) IX[B]
[26] -1 0x00008400 - 0x0000847f (0x80) IX[B]
[27] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[28] -1 0x00005000 - 0x0000501f (0x20) IX[B]
[29] -1 0x0000cc00 - 0x0000cc0f (0x10) IX[B]
[30] -1 0x0000c800 - 0x0000c803 (0x4) IX[B]
[31] -1 0x0000c400 - 0x0000c407 (0x8) IX[B]
[32] -1 0x0000c000 - 0x0000c003 (0x4) IX[B]
[33] -1 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[34] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[35] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[36] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISCXFree86.0.log
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "/usr/X11R6/lib/modules/extensions/libglx.so" (glx)
(WW) LoadModule: given non-canonical module name
"/usr/X11R6/lib/modules/extensions/libglx.so"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) NVIDIA XFree86 Driver 1.0-3123 Tue Aug 27 16:00:08 PDT 2002
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS,
GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460,
GeForce4 MX 440, GeForce4 MX 420, Quadro4 500/550 XGL,
Quadro4 200/400 NVS, NV18, NV18 , NV18 , NV18, NV18GL, NV18GL ,
NV18GL , 0x01F0, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500,
Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200,
Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, NV28, NV28 ,
NV28GL, NV28GL , GeForce2 Go, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce4 Ti 4400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdb000000 - 0xdb003fff (0x4000) MX[B]
[6] -1 0xdb005000 - 0xdb005fff (0x1000) MX[B]
[7] -1 0xdb004000 - 0xdb0047ff (0x800) MX[B]
[8] -1 0xdb006000 - 0xdb006fff (0x1000) MX[B]
[9] -1 0xdc001000 - 0xdc001fff (0x1000) MX[B]
[10] -1 0x20000000 - 0x200003ff (0x400) MX[B]
[11] -1 0xdc100000 - 0xdc1003ff (0x400) MX[B]
[12] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[13] -1 0xdc000000 - 0xdc000fff (0x1000) MX[B](B)
[14] -1 0xd0000000 - 0xd007ffff (0x80000) MX[B](B)
[15] -1 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
[17] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0x0000a000 - 0x0000a00f (0x10) IX[B]
[20] -1 0x00009c00 - 0x00009c03 (0x4) IX[B]
[21] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[24] -1 0x00008c00 - 0x00008c3f (0x40) IX[B]
[25] -1 0x00008800 - 0x0000883f (0x40) IX[B]
[26] -1 0x00008400 - 0x0000847f (0x80) IX[B]
[27] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[28] -1 0x00005000 - 0x0000501f (0x20) IX[B]
[29] -1 0x0000cc00 - 0x0000cc0f (0x10) IX[B]
[30] -1 0x0000c800 - 0x0000c803 (0x4) IX[B]
[31] -1 0x0000c400 - 0x0000c407 (0x8) IX[B]
[32] -1 0x0000c000 - 0x0000c003 (0x4) IX[B]
[33] -1 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[34] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[35] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[36] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdb000000 - 0xdb003fff (0x4000) MX[B]
[6] -1 0xdb005000 - 0xdb005fff (0x1000) MX[B]
[7] -1 0xdb004000 - 0xdb0047ff (0x800) MX[B]
[8] -1 0xdb006000 - 0xdb006fff (0x1000) MX[B]
[9] -1 0xdc001000 - 0xdc001fff (0x1000) MX[B]
[10] -1 0x20000000 - 0x200003ff (0x400) MX[B]
[11] -1 0xdc100000 - 0xdc1003ff (0x400) MX[B]
[12] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[13] -1 0xdc000000 - 0xdc000fff (0x1000) MX[B](B)
[14] -1 0xd0000000 - 0xd007ffff (0x80000) MX[B](B)
[15] -1 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[16] -1 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
[17] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0x0000a000 - 0x0000a00f (0x10) IX[B]
[23] -1 0x00009c00 - 0x00009c03 (0x4) IX[B]
[24] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[25] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[26] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[27] -1 0x00008c00 - 0x00008c3f (0x40) IX[B]
[28] -1 0x00008800 - 0x0000883f (0x40) IX[B]
[29] -1 0x00008400 - 0x0000847f (0x80) IX[B]
[30] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[31] -1 0x00005000 - 0x0000501f (0x20) IX[B]
[32] -1 0x0000cc00 - 0x0000cc0f (0x10) IX[B]
[33] -1 0x0000c800 - 0x0000c803 (0x4) IX[B]
[34] -1 0x0000c400 - 0x0000c407 (0x8) IX[B]
[35] -1 0x0000c000 - 0x0000c003 (0x4) IX[B]
[36] -1 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[37] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[38] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[39] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
[40] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[41] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xC8000000
(--) NVIDIA(0): MMIO registers at 0xD8000000
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): Detected TV Encoder: Brooktree 871
(--) NVIDIA(0): Display 0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) NVIDIA(0): A110: Using hsync range of 30.00-97.00 kHz
(II) NVIDIA(0): A110: Using vrefresh range of 50.00-180.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(WW) (1856x1392,A110) mode clock 218.3MHz exceeds DDC maximum 210MHz
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(WW) (1920x1440,A110) mode clock 234MHz exceeds DDC maximum 210MHz
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(**) NVIDIA(0): Validated modes for Display Device 0:
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1152 x 864
(--) NVIDIA(0): Display dimensions: (400, 300) mm
(--) NVIDIA(0): DPI set to (73, 73)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xd0000000 - 0xd007ffff (0x80000) MX[B]
[1] 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
[2] 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B]
[3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0xdb000000 - 0xdb003fff (0x4000) MX[B]
[9] -1 0xdb005000 - 0xdb005fff (0x1000) MX[B]
[10] -1 0xdb004000 - 0xdb0047ff (0x800) MX[B]
[11] -1 0xdb006000 - 0xdb006fff (0x1000) MX[B]
[12] -1 0xdc001000 - 0xdc001fff (0x1000) MX[B]
[13] -1 0x20000000 - 0x200003ff (0x400) MX[B]
[14] -1 0xdc100000 - 0xdc1003ff (0x400) MX[B]
[15] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[16] -1 0xdc000000 - 0xdc000fff (0x1000) MX[B](B)
[17] -1 0xd0000000 - 0xd007ffff (0x80000) MX[B](B)
[18] -1 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[19] -1 0xd8000000 - 0xd8ffffff (0x1000000) MX[B](B)
[20] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[21] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[22] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[23] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0x0000a000 - 0x0000a00f (0x10) IX[B]
[26] -1 0x00009c00 - 0x00009c03 (0x4) IX[B]
[27] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[28] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[29] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[30] -1 0x00008c00 - 0x00008c3f (0x40) IX[B]
[31] -1 0x00008800 - 0x0000883f (0x40) IX[B]
[32] -1 0x00008400 - 0x0000847f (0x80) IX[B]
[33] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[34] -1 0x00005000 - 0x0000501f (0x20) IX[B]
[35] -1 0x0000cc00 - 0x0000cc0f (0x10) IX[B]
[36] -1 0x0000c800 - 0x0000c803 (0x4) IX[B]
[37] -1 0x0000c400 - 0x0000c407 (0x8) IX[B]
[38] -1 0x0000c000 - 0x0000c003 (0x4) IX[B]
[39] -1 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[40] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[41] -1 0x0000b000 - 0x0000b01f (0x20) IX[B]
[42] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
[43] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[44] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1152x864"
(II) NVIDIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided FillMono8x8PatternRects replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
20 128x128 slots
4 256x256 slots
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) [GLX]: Calling GlxExtensionInit
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
==================================================
On Sunday 29 September 2002 11:48 am, you wrote:
> On Sunday 29 September 2002 01:33 pm, Lorne wrote:
> > I notice that this is mentioned in the 64 page readme file that
> > came with the driver.
> >
> > The problem I'm having now is that they make some assumptions about
> > what my config file looks like and I'm having trouble reading
> > between the lines. the first time I guessed at what I needed, it
> > started to come up but died. I wonder if I might be wiser to use
> > XF86configurator to make fresh one, but what tool do I use to
> > configure XF86config-4? it seems the old tools just modify the old
> > one. It has been quite awhile since I've fooled with the old manual
> > way of doing things. :) Since they have gone to 4.x of Xfree I've
> > not kept up.
>
> Well, if you feel it's necessary, I would use XFdrake --noexpert
> --noauto and choose the closest to gf4 (seems like that might even
> be in there now). Yeah, the format has changed recently slightly,
> but I'm not so sure it's not a mandrake thing. But I got to tell you
> that every distros XF86Config-4 looks different from the examples
> seen and from each other. suse's is a big ole ugly mess with a
> warning not to edit it manually! redhat's is called XF86Config and
> looks strange. But one common thread is the basic items are there
> even if they look a little different.
>
> [s@tuxmachine]:docs$ cat XF86Config-4
> # File generated by XFdrake.
>
> #
> **********************************************************************
> # Refer to the XF86Config man page for details about the format of
> # this file.
> #
> **********************************************************************
>
> Section "Files"
> # Multiple FontPath entries are allowed (they are concatenated
> together)
> # By default, Mandrake 6.0 and later now use a font server
> independent of
> # the X server to render fonts.
> FontPath "unix/:-1"
> EndSection
>
> Section "ServerFlags"
> #DontZap # disable <Crtl><Alt><BS> (server abort)
> AllowMouseOpenFail # allows the server to start up even if the
> mouse doesn't work
> #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution
> switching)
> EndSection
>
> Section "Module"
> Load "dbe" # Double-Buffering Extension
> Load "v4l" # Video for Linux
> Load "extmod"
> Load "type1"
> Load "freetype"
> Load "glx" # 3D layer <- this is the glx line that XFdrake adds,
> # but if not there, add yourself
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> Option "XkbOptions" ""
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "MouseManPlusPS/2"
> Option "Device" "/dev/psaux"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "monitor1"
> VendorName "Hitachi, Ltd."
> ModelName "Hitachi CM611"
> HorizSync 31.0-92.0
> VertRefresh 50.0-120.0
>
> # Sony Vaio C1(X,XS,VE,VN)?
> # 1024x480 @ 85.6 Hz, 48 kHz hsync
> ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494
> 563 -hsync -vsync
>
> # TV fullscreen mode or DVD fullscreen output.
> # 768x576 @ 79 Hz, 50 kHz hsync
> ModeLine "768x576" 50.00 768 832 846 1000 576 590 595
> 630
>
> # 768x576 @ 100 Hz, 61.6 kHz hsync
> ModeLine "768x576" 63.07 768 800 960 1024 576 578 590
> 616
> EndSection
>
> Section "Device"
> Identifier "device1"
> BoardName "NVIDIA GeForce4 (generic)"
> Driver "nvidia" # <- this is where you change "nv" to "nvidia"
> Option "DPMS"
> Option "NvAGP" "1" # <- here & following are all options
> Option "NoLogo" "on"
> Option "CursorShadow" "on"
> Option "CursorShadowAlpha" "64"
> Option "CursorShadowXOffset" "2"
> Option "CursorShadowYOffset" "1"
>
> EndSection
>
> Section "Screen"
> Identifier "screen1"
> Device "device1"
> Monitor "monitor1"
> DefaultColorDepth 16
>
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
> "640x480"
> EndSubsection
>
> Subsection "Display"
> Depth 15
> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
> "640x480"
> EndSubsection
>
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
> "640x480"
> EndSubsection
>
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600"
> "640x480"
> EndSubsection
> EndSection
>
> Section "ServerLayout"
> Identifier "layout1"
> InputDevice "Keyboard1" "CoreKeyboard"
> InputDevice "Mouse1" "CorePointer"
> Screen "screen1"
> EndSection
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
