Please let me know if the code I checked in fixed the problem. Thanks for the hint Frank.
Bob Tom Thompson wrote: > The X2 delay is certainly the key. My svn 537 that was working had the > X2 delay set to zero. When I set it to a larger number the tone can be > heard when switching from tune back to receive. I appologize for the > misleading with svn 537. > > Tom, W0IVJ > > > [EMAIL PROTECTED] wrote: > > >> Frank, >> >> I think you are on the right track here. A working example of the problems >> can be seen by setting X2 Delay to (say for example ) 200ms and then >> pressing the TUNE button. You will notice that when you toggle OFF the tune >> button you hear the CW side tone for whatever that delay amount is set to. >> Also, when in SSB, you can notice the last "sylable" of spoken words into >> the mic, if you keep talking past exact point when you toggle off the PTT.. >> So something isn't quite right there.. >> >> -Dan >> >> ----- Original Message ----- >> From: "Frank Brickle" <[EMAIL PROTECTED]> >> To: <flexradio@flex-radio.biz> >> Sent: Tuesday, June 27, 2006 2:05 PM >> Subject: Re: [Flexradio] audio pop >> >> >> >> >> >>> Where is the value of top.swch.fade -- that's essentially the TRX >>> crossfade time, in samples -- being set? In the PowerSDR code I >>> can trace it back through setup_switching() to setup() but haven't >>> been able to find the call to setup() :-) >>> >>> 73 >>> Frank >>> AB2KT >>> >>> Tom Thompson wrote: >>> >>> >>> -- AMSAT VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats, NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk Grp Chairman Time for a new motto, what should I choose? _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
