If I set the drive to 30 and the TX Gain set to -8 so the the mic reading is 0db then key up for PSK using Mixw, I show about 2 watts output both on the power meter in PSDR and an external watt meter. Normally I would get about 10-15 watts output with the past version. Now if I crank up the Tx gain to 2, the mic reads 9db and the output is where it should be, however, I don't feel this is what it should be. If go to the TUN mode I get the proper power out all the way up to 100 watts so the F5K is ok.
I experienced this problem earlier with 1.13 test version and now I am experiencing it with v1.14.0. Don - kx9q _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/