It sounds like the rx2 EEPROM data did not transfer into the original DB properly when it was initially created. Doing a factory default reset did a new EEPROM data dump into the new database and it looks like it did it right the second time around.
-Tim --- Sent from my iPhone with typos included at no extra charge. On Mar 10, 2012, at 7:52 PM, "K0DAN" <k0...@comcast.net> wrote: > Dudley & Tim: > > I’m happy to report the problem is fixed! But I’m puzzled why it happened in > the first place. > > So: I went from PSDR 2.2.3 to 2.3.5. I just ran the standard install and it > did its thing. > > I did NOT import a prior database, I simply assumed new/default database > would install itself. I then went through it and tweaked it to look as much > as possible like my prior 2.2.3 database. I rebooted at least once during the > process. Then, whenever I invoked R2, it puked. > > The solution (thanks Dudley) was to force a 2.3.5 factory default database. > This did work, so I’m happy with that, but it seems redundant from the > original update. > > Is that extra step, SET FACTORY DEFAULTS, a requirement of A NEW PSDR upgrade? > > In any case, all’s now working well, thanks for the 24x7 support guys! > > 73 > > Dan > K0DAN > > > From: FlexRadio Support, Dudley Hurry > Sent: March 10, 2012 01:56 AM > To: K0DAN > Cc: Dudley Hurry ; t...@flex-radio.com ; Flexradio Reflector > Subject: Re: [Flexradio] PSDR v2.3.5 > > Dan, > > Since it runs under 2.2.3, first try the Factory Reset to reset the database, > if it still fails, I would uninstall PowerSDR (using the Installer) and > then remove the PowerSDR 2.3.5 folder under the User, appdata directory.. > Then start over with the install, something must have missed in the > installation.. > > But let us all know what happens. :-) > > > 73, > Dudley > > WA5QPZ > FlexRadio Systems > > (512) 535-4713, Option 2 > Email: mailto:dud...@flex-radio.com > Web: www.flexradio.com > > > > Chat > > FlexRadio Systems™ > 4616 W Howard Ln Ste 1-150 > Austin, TX 78728 > > <logo_300x37.bmp> > Tune In Excitement™ > PowerSDR™ is a trademark of FlexRadio Systems > > > > > > On Fri, Mar 9, 2012 at 11:42 PM, K0DAN <k0...@comcast.net> wrote: > Per Dudley's email, I was hoping I would have a "D'OH!" moment and discover > I'd forgotten to reboot, but went thru all that and same error. > > PSDR 2.2.3 works fine with R2, but when I run PSDR 2.3.5 it pukes as soon as > I call up R2. > > Awaiting other suggestions! > > Tnx es 73 > > dan > k0dan > > -----Original Message----- From: Dudley Hurry > Sent: March 09, 2012 09:27 PM > To: K0DAN > Cc: Flexradio Reflector > Subject: Re: [Flexradio] PSDR v2.3.5 > > > Dan , > > Have you rebooted since? Sounds like .NET missed something. > > 73, > Dudley > WA5QPZ > > Sent from my iPhone > > > On Mar 9, 2012, at 7:12 PM, "K0DAN" <k0...@comcast.net> wrote: > > Radio is a F5K+RX2+ATU on WIN7 Ultimate/x64. > > I just installed PSDR v2.3.5 and customized my database. > > Started playing around and discovered that R2 doesn't work: > - The R2 panadaptor doesn't open > - There's a big red X across the R1 panadaptor > - R1 continues to receive but you can't see what's going on > - Can't recover from this situation unless I close PSDR and restart (all OK > until I try R2 again) > > Got the following error dump (below). > > What do I do now? > > Tnx es 73 > > Dan > k0dan > > > > See the end of this message for details on invoking > just-in-time (JIT) debugging instead of this dialog box. > > ************** Exception Text ************** > System.OverflowException: Overflow error. > at System.Drawing.Graphics.CheckErrorStatus(Int32 status) > at System.Drawing.Graphics.FillPolygon(Brush brush, Point[] points, FillMode > fillMode) > at System.Drawing.Graphics.FillPolygon(Brush brush, Point[] points) > at PowerSDR.Display.DrawPanadapter(Graphics g, Int32 W, Int32 H, Int32 rx, > Boolean bottom) > at PowerSDR.Display.RenderGDIPlus(PaintEventArgs& e) > at PowerSDR.Console.picDisplay_Paint(Object sender, PaintEventArgs e) > at System.Windows.Forms.Control.OnPaint(PaintEventArgs e) > at System.Windows.Forms.PictureBox.OnPaint(PaintEventArgs pe) > at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, > Int16 layer, Boolean disposeEventArgs) > at System.Windows.Forms.Control.WmPaint(Message& m) > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
