Jody Gugelhupf wrote:
> okey maybe i'm doing something wrong when getting the svn stuff here is what
> i do:
>
> svn co svn://svn.freevo.org/freevo/branches/rel-1 freevo-1.x
>
> change into /home/judy/freevo-1.x/freevo then I export the installation path
> so that freevo picks
> up the modules from there and not a current installation by doing this:
>
> export PYTHONPATH=~/freevo-test
>
> next I want to install freevo into the test directory, so I do
> python setup.py install --prefix=$PYTHONPATH
>
> I get:
> checking for xml.utils.qp_xml... found
> checking for kaa... found
> checking for kaa.metadata... found
> checking for kaa.imlib2... found
> checking for BeautifulSoup... found
> checking for pygame... found
> checking for Image... found
> checking for elementtree... found
> checking for twisted... found
> checking for twisted.web.microdom... found
> Docs/howto not found. Looks like you are using the CVS version
> of Freevo. Please run ./autogen.sh first
>
> so I run ./autogen.sh
> works without problems, then I run the install command again:
>
> python setup.py install --prefix=$PYTHONPATH
>
> and change into the newly installed freevo directory
>
> cd $PYTHONPATH
>
> Then I copy your existing freevo configuration files to the current
> directory, this allows you to
> play with the options before messing up your existing configuration
>
> cp -pv /etc/freevo/* $PYTHONPATH
sorry my fault the correct PYTHONPATH should be:
export PYTHONPATH=~/freevo-test/lib/python2.4/site-packages
I'll update the instructions in the wiki.
I moved site-packages/freevo out of the way and tried ./bin/freevo
prompt and it complained about "can't find python version with installed
freevo" so the promblem was clear.
Duncan
>
> I adjust the local_conf.py and start
>
> ./bin/freevo
>
>
> and it is still not working and although I said that when i e.g. delte a
> bracket in the
> local_conf.py it stop there and tells me to fix it also has antoher strange
> behaviour, I usually
> have WWW_USERS = { turned on, but not in the new local_conf.py, but it still
> ask me for username
> and password, when I enable it then everything works fine, can it be that it
> somehow reads from
> two local_conf.py I did a 'locate local_conf.py' and renamed them all except
> the one in
> ~/freevo-test of course, don't know anyone has an idea?
> thx :D
>
>
>
>
> --- "Frank [Antispam account]" <[EMAIL PROTECTED]> wrote:
>
>> I have PERSONAL_WWW_PAGE = [('My Page', 'a single personal web page',
>> 'test.html') ] in my local_conf.py
>> And a test.html in /usr/share/freevo/htdocs and it works like a charm.
>>
>> (working with the latest svn)
>>
>> Greetz,
>> Frank
>>
>> -----Oorspronkelijk bericht-----
>> Van: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] Namens Duncan Webb
>> Verzonden: 02 June 2007 23:02
>> Aan: freevo-users@lists.sourceforge.net
>> Onderwerp: Re: [Freevo-users] vlc plugin - how to use?
>>
>> Jody Gugelhupf wrote:
>>> still problems...
>>>
>>>> Jody Gugelhupf wrote:
>>>>>> Jody Gugelhupf wrote:
>>>>>>> hi there again :)
>>>>>>> thx for the link, got it and tried this out:
>>>>>>> PERSONAL_WWW_PAGE = [
>>>>>>> ('My Page', 'a single personal web page', 'test.html') ]
>>>> This is strange, I just added the above lines to my local_conf.py and
>>>> just to the right of 'Help' is 'My Page'
>>>>
>>>> can you check web_types.py and see it the has a PERSONAL_WWW_PAGE?
>>>>
>>>> # grep PERSONAL src/www/web_types.py
>>>> if hasattr(config, 'PERSONAL_WWW_PAGE'):
>>>> for page in config.PERSONAL_WWW_PAGE:
>>> checked it and got exactly the same
>>>
>>>> If not then your svn version is too old. If you have use a view
>>>> source option of the web page in your browser and see if the item is
>> there.
>>>> Sometimes the pages are cached by the browser and adding a '?' to the
>>>> end of the URL forces a refresh. eg.
>>>>
>>>> http://localhost:8080/?
>>>>
>>> checked the source, item is not there and did several refresh also
>>> with '?' at the end but nothing, made absolutly sure that the correct
>>> local_conf.py was loaded, but it's just not working and no errors in the
>> webserverlog of freevo, any other ideas? someeles the same problems?
>>> cheers =)
>> Try the attached patch and look for the text 'adding personal web page'
>> in the webserver.X.log, if the text is not there then you must be picking up
>> the wrong local_conf.py.
>>
>> IIRC it should be in the directory that you are running freevo test
>> installation from.
>>
>> Duncan
>>
>>>>>>> and put the test.html into the
>>>>>>> ~/freevo-test/share/freevo/htdcos
>>>>>> Do you mean?
>>>>>> ~/freevo-test/share/freevo/htdocs
>>>>> yes i mean that
>>>>>
>>>>> --- Duncan Webb <[EMAIL PROTECTED]> wrote:
>>>>>
>>>>>> Jody Gugelhupf wrote:
>>>>>>> hi there again :)
>>>>>>> thx for the link, got it and tried this out:
>>>>>>> PERSONAL_WWW_PAGE = [
>>>>>>> ('My Page', 'a single personal web page', 'test.html') ] and
>>>>>>> put the test.html into the ~/freevo-test/share/freevo/htdcos
>>>>>> Do you mean?
>>>>>> ~/freevo-test/share/freevo/htdocs
>>>>>>
>>>>>>> directory, where also the index.rpy and the others are, then i
>>>>>>> started freevo
>>>>>> Did you set
>>>>>> export PYTHON_PATH=~/freevo-test
>>>>> yes i did
>>>>>
>>>>>
>>>>>> Just to be very sure that the new files are being picked up you can
>>>>>> move the non-svn directories out of the way.
>>>>>> mv /usr/share/freevo /usr/share/freevo-original
>>>>> did it
>>>>>
>>>>>> I'm not 100% sure how the html docs are picked up, possibly it is
>>>>>> hard-coded somewhere, hopefully not.
>>>>>>
>>>>>> Duncan
>>>>> still no extra tab anywhere to see, any other ideas or suggestions?
>>>>>
>>>>> thx katie :)
>>>>>
>>>>>
>>>>>
>>>>>>> katie :)
>>>>>>>
>>>>>>> --- Duncan Webb <[EMAIL PROTECTED]> wrote:
>>>>>>>
>>>>>>>> Jody Gugelhupf wrote:
>>>>>>>>> well i have created a little side which automatically initiates
>>>>>>>>> 2 vlc streams when i open
>>>> it
>>>>>>>>> directly from my tv card for live tv streaming and watching over
>>>>>>>>> the internet, one stream
>>>> is
>>>>>> a
>>>>>>>> mms
>>>>>>>>> stream and the other is a http stream i also wrote a littel
>>>>>>>>> script which makes able to
>>>>>> switch
>>>>>>>>> channels via the website interface, the nice thing is that the
>>>>>>>>> stream is not interupted
>>>> for
>>>>>>>>> switching the channles, the command is send directly to my
>>>>>>>>> tvtuner, thus a continous
>>>> stream,
>>>>>>>> it
>>>>>>>>> works really nice, now it would really cool if i could combine
>>>>>>>>> it with my freevo
>>>> webserver,
>>>>>>>> atm i
>>>>>>>>> run it on my apache webserber, cuz i don't know how to add it to
>>>>>>>>> the freevo webserver, the
>>>>>>>> nicest
>>>>>>>>> thing would be just to have an extra tab, which then loads my
>>>>>>>>> site, any ideas on how to
>>>>>>>> accomplish
>>>>>>>>> that?
>>>>>>>> You're in luck, while I was looking at how this is implemented I
>>>>>>>> noticed that it is very easy to do so this feature is now in the
>>>>>>>> svn rel-1 branch. Check the local_conf.py.example for the settings.
>>>>>>>>
>>>>>>>> I allows you to either have a page as html or rpy or a directory of
>> pages.
>>>>>>>> Writing pages as rpy is surprisingly easy, just look at the
>>>>>>>> existing pages. Writing html with the freevo css is not too
>>>>>>>> difficult, just a question of using the correct tags.
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Freevo-users mailing list
>> Freevo-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>
>
>
>
> Get news delivered with the All new Yahoo! Mail. Enjoy RSS feeds right
> on your Mail page. Start today at http://mrd.mail.yahoo.com/try_beta?.intl=ca
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Freevo-users mailing list
> Freevo-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
