hi there again, i have done the changes u suggested
> sorry my fault the correct PYTHONPATH should be: > export PYTHONPATH=~/freevo-test/lib/python2.4/site-packages > > I'll update the instructions in the wiki. > > I moved site-packages/freevo out of the way and tried ./bin/freevo > prompt and it complained about "can't find python version with installed > freevo" so the promblem was clear. > > Duncan but still same issue, also still pretty sure it uses the right local_conf.py, deleted a bracket again to test and yep it the right loca_conf.py, it also still doesn't print 'adding personal web page' in the log... got any other tips? thx :D > > I adjust the local_conf.py and start > > > > ./bin/freevo > > > > > > and it is still not working and although I said that when i e.g. delte a > > bracket in the > > local_conf.py it stop there and tells me to fix it also has antoher strange > > behaviour, I > usually > > have WWW_USERS = { turned on, but not in the new local_conf.py, but it > > still ask me for > username > > and password, when I enable it then everything works fine, can it be that > > it somehow reads > from > > two local_conf.py I did a 'locate local_conf.py' and renamed them all > > except the one in > > ~/freevo-test of course, don't know anyone has an idea? > > thx :D > > > > > > > > > > --- "Frank [Antispam account]" <[EMAIL PROTECTED]> wrote: > > > >> I have PERSONAL_WWW_PAGE = [('My Page', 'a single personal web page', > >> 'test.html') ] in my local_conf.py > >> And a test.html in /usr/share/freevo/htdocs and it works like a charm. > >> > >> (working with the latest svn) > >> > >> Greetz, > >> Frank > >> > >> -----Oorspronkelijk bericht----- > >> Van: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] Namens Duncan Webb > >> Verzonden: 02 June 2007 23:02 > >> Aan: freevo-users@lists.sourceforge.net > >> Onderwerp: Re: [Freevo-users] vlc plugin - how to use? > >> > >> Jody Gugelhupf wrote: > >>> still problems... > >>> > >>>> Jody Gugelhupf wrote: > >>>>>> Jody Gugelhupf wrote: > >>>>>>> hi there again :) > >>>>>>> thx for the link, got it and tried this out: > >>>>>>> PERSONAL_WWW_PAGE = [ > >>>>>>> ('My Page', 'a single personal web page', 'test.html') ] > >>>> This is strange, I just added the above lines to my local_conf.py and > >>>> just to the right of 'Help' is 'My Page' > >>>> > >>>> can you check web_types.py and see it the has a PERSONAL_WWW_PAGE? > >>>> > >>>> # grep PERSONAL src/www/web_types.py > >>>> if hasattr(config, 'PERSONAL_WWW_PAGE'): > >>>> for page in config.PERSONAL_WWW_PAGE: > >>> checked it and got exactly the same > >>> > >>>> If not then your svn version is too old. If you have use a view > >>>> source option of the web page in your browser and see if the item is > >> there. > >>>> Sometimes the pages are cached by the browser and adding a '?' to the > >>>> end of the URL forces a refresh. eg. > >>>> > >>>> http://localhost:8080/? > >>>> > >>> checked the source, item is not there and did several refresh also > >>> with '?' at the end but nothing, made absolutly sure that the correct > >>> local_conf.py was loaded, but it's just not working and no errors in the > >> webserverlog of freevo, any other ideas? someeles the same problems? > >>> cheers =) > >> Try the attached patch and look for the text 'adding personal web page' > >> in the webserver.X.log, if the text is not there then you must be picking > >> up > >> the wrong local_conf.py. > >> > >> IIRC it should be in the directory that you are running freevo test > >> installation from. > >> > >> Duncan > >> > >>>>>>> and put the test.html into the > >>>>>>> ~/freevo-test/share/freevo/htdcos > >>>>>> Do you mean? > >>>>>> ~/freevo-test/share/freevo/htdocs > >>>>> yes i mean that > >>>>> > >>>>> --- Duncan Webb <[EMAIL PROTECTED]> wrote: > >>>>> > >>>>>> Jody Gugelhupf wrote: > >>>>>>> hi there again :) > >>>>>>> thx for the link, got it and tried this out: > >>>>>>> PERSONAL_WWW_PAGE = [ > >>>>>>> ('My Page', 'a single personal web page', 'test.html') ] and > >>>>>>> put the test.html into the ~/freevo-test/share/freevo/htdcos > >>>>>> Do you mean? > >>>>>> ~/freevo-test/share/freevo/htdocs > >>>>>> > >>>>>>> directory, where also the index.rpy and the others are, then i > >>>>>>> started freevo > >>>>>> Did you set > >>>>>> export PYTHON_PATH=~/freevo-test > >>>>> yes i did > >>>>> > >>>>> > >>>>>> Just to be very sure that the new files are being picked up you can > >>>>>> move the non-svn directories out of the way. > >>>>>> mv /usr/share/freevo /usr/share/freevo-original > >>>>> did it > >>>>> > >>>>>> I'm not 100% sure how the html docs are picked up, possibly it is > >>>>>> hard-coded somewhere, hopefully not. > >>>>>> > >>>>>> Duncan > >>>>> still no extra tab anywhere to see, any other ideas or suggestions? > >>>>> > >>>>> thx katie :) > >>>>> > >>>>> > >>>>> > >>>>>>> katie :) > >>>>>>> > >>>>>>> --- Duncan Webb <[EMAIL PROTECTED]> wrote: > >>>>>>> > >>>>>>>> Jody Gugelhupf wrote: > >>>>>>>>> well i have created a little side which automatically initiates > >>>>>>>>> 2 vlc streams when i open > >>>> it > >>>>>>>>> directly from my tv card for live tv streaming and watching over > >>>>>>>>> the internet, one stream > >>>> is > >>>>>> a > >>>>>>>> mms > >>>>>>>>> stream and the other is a http stream i also wrote a littel > >>>>>>>>> script which makes able to > >>>>>> switch > >>>>>>>>> channels via the website interface, the nice thing is that the > >>>>>>>>> stream is not interupted > >>>> for > >>>>>>>>> switching the channles, the command is send directly to my > >>>>>>>>> tvtuner, thus a continous > >>>> stream, > >>>>>>>> it > >>>>>>>>> works really nice, now it would really cool if i could combine > >>>>>>>>> it with my freevo > >>>> webserver, > >>>>>>>> atm i > >>>>>>>>> run it on my apache webserber, cuz i don't know how to add it to > >>>>>>>>> the freevo webserver, the > >>>>>>>> nicest > >>>>>>>>> thing would be just to have an extra tab, which then loads my > >>>>>>>>> site, any ideas on how to > >>>>>>>> accomplish > >>>>>>>>> that? > >>>>>>>> You're in luck, while I was looking at how this is implemented I > >>>>>>>> noticed that it is very easy to do so this feature is now in the > >>>>>>>> svn rel-1 branch. Check the local_conf.py.example for the settings. > >>>>>>>> > >>>>>>>> I allows you to either have a page as html or rpy or a directory of > >> pages. > >>>>>>>> Writing pages as rpy is surprisingly easy, just look at the > >>>>>>>> existing pages. Writing html with the freevo css is not too > >>>>>>>> difficult, just a question of using the correct tags. > >> > >> ------------------------------------------------------------------------- > >> This SF.net email is sponsored by DB2 Express > >> Download DB2 Express C - the FREE version of DB2 express and take > >> control of your XML. No limits. Just data. Click to get it now. > >> http://sourceforge.net/powerbar/db2/ > >> _______________________________________________ > >> Freevo-users mailing list > >> Freevo-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/freevo-users > >> > > > > > > > > Get news delivered with the All new Yahoo! Mail. Enjoy RSS feeds > > right on your Mail > page. Start today at http://mrd.mail.yahoo.com/try_beta?.intl=ca > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/ > > _______________________________________________ > > Freevo-users mailing list > > Freevo-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users