On Aug 9, 2009, at 6:47 PM, Dan wrote:

>
> At 2:51 PM -0400 8/9/2009, Bill Connelly wrote:
>> 6. Leaving power to monitor and digital keyboard connected / On.
>> Perhaps turning all these off with a dedicated power strip / switch
>> (also a mixer board and amp system) affected the QS's knowledge of  
>> the
>> monitor / ATI Radeon 9800 Pro, giving an occasional ATI card error?
>
> Can you repeatedly sleep and wake (just) the display successfully?
>
> Shouldn't need to sleep the keyboard.

Without removing the PCI card, I cannot try Sleep since my M-Audio  
Delta 2496 does not support it. I believe alone, I was able to Sleep  
the monitor off the ATI Radeon 9800 Pro ME.
>
>> QS's and FW External drives AC/DC warts are on a separate "always on"
>> strip (except during passing electrical storms).
>
> And to where are all these strips connected - same or different  
> circuits?

They're all plugged into the same circuit. They don't all get powered  
on at the same time, but they run successfully off the same line.
>
> I've run into a few situations where people had their systems on one
> set of power strips, then some peripherals on another set --- each
> set connecting to a different circuit (breaker).  The slight diff in
> ground potential between the two circuits made things flaky.

My setup Startup'ed successfully again tonight.

I believe it is finally stable ... at 10.5.7

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
To unsubscribe from this group, send email to 
g3-5-list-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to