How do you think the glue would work during assembly on the playa? Seems just a wiff of dust could make it less able to adhere?
Are you aware of any of that vinyl with tape peel backing? Thanks, Phoenix On May 8, 2013, at 12:53 AM, Vladimir Khodel wrote: > > I've found some 4 gauge clear vinyl that is working extremely well. It's > cheap at $2.99 for a 4.5x1yd piece (2.99/yd), so even at 19yds, It'll be > about the price of single expensive roll of 6"BFT. It's also much thicker, > and made to widthstand hot/cold outdoor type environments. I cut the vinyl > into 3" strips. (My test board is .75" so I may need to go to 4" strips > during production, so that's 4*112 instead of 6). > > I've been using contact cement to glue it to the boards. The glue I bought > for testing purposes was about $4 for 3oz. and you use about .75-1oz per > join. I have 112 of them, so.. yikes. I'm sure I could find it cheaper in > bulk and a way to use less. Spray adhesive is probably just as strong, but > it's messier, you waste a lot, and it's more expensive. Contact Cement is > super duper strong, I'd say stronger than the foil facing is bonded to the > paper facing. Probably about as strong as the paper facing is bonded to the > foam itself, if not more. Sorry, I don't have pics yet, but when I get the > chance, I'll put some up. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at http://groups.google.com/group/hexayurt?hl=en. For more options, visit https://groups.google.com/groups/opt_out.