You found one, Great! Great. Excellent. Of course the instructions are now wrong because a $, @ and # would be invalid if you used them, but that's a whole nuther issue. (-:
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dave Salt Sent: 12. heinäkuuta 2008 0:15 To: IBM-MAIN@BAMA.UA.EDU Subject: Re: How to change the ISPF code page? I then repeated the test where my emulator and ZTERMCID were both set to CP-278, and again I saw exactly what is displayed above. But when I changed my emulator to CP-37 and left ZTERMCID as CP-278 (and vice versa), this is what I saw: Each qualifier must begin with an alphabetic character (A to Z) or one of the special characters Ö, Ä, and Å. As you can see from above, it *does* make a difference whether the emulator and ISPF are both using the same code page or not. Dave Salt See the new SimpList(tm) rollover image at: http://www.mackinney.com/products/SIM/simplist.htm ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html