Hi, Terry.
You might want to take a look at the SHARE presentation "Sharing the
Wealth Using Vlans on Vswitch". It discusses how to set up VSWITCH and
hipersockets configuration similar to what you are describing.
If you can't snag a copy, I can send it to you.
Have a good one.
On 04/05/2010 02:51 PM, Martin, Terry R. (CMS/CTR) (CTR) wrote:
Hi
I have a bit of a delima. We do a lot of talking from our z/OS system
over to our z/VM z/Linux systems via HiperSockets. We have a request for
about 20 more z/Linux guests all of which will have two HiperSockets
CHPIDs (3 UCBS per guest off of the different CHPIDS). The issue is that
I am using pretty much the max number of UCBs allowed. So I was
wondering what folks are doing when they have these requirements but are
at the max of allowable addresses within the HiperSockets CHPIDs. I know
that I can share the spanned HiperSockets CHPIDs across different LPARS
using the same UCBs as the other LPARS as long as I do not re-use them
on the same LPAR I am ok. So maybe the way to go is to create another
LPAR or two I don't know? Any help would be appreciated.
Thank You,
Terry Martin
Lockheed Martin - Citic
z/OS and z/VM Performance Tuning and Operating Systems Support
Office - 443 348-2102
Cell - 443 632-4191
--
Dave Jones
V/Soft
www.vsoft-software.com
Houston, TX
281.578.7544
