Dave, If have a copy that would great!
Thank You, Terry Martin Lockheed Martin - Citic z/OS and z/VM Performance Tuning and Operating Systems Support Office - 443 348-2102 Cell - 443 632-4191 -----Original Message----- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Dave Jones Sent: Monday, April 05, 2010 4:47 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: HiperSocket UCBs Hi, Terry. You might want to take a look at the SHARE presentation "Sharing the Wealth Using Vlans on Vswitch". It discusses how to set up VSWITCH and hipersockets configuration similar to what you are describing. If you can't snag a copy, I can send it to you. Have a good one. On 04/05/2010 02:51 PM, Martin, Terry R. (CMS/CTR) (CTR) wrote: > > > Hi > > > > I have a bit of a delima. We do a lot of talking from our z/OS system > over to our z/VM z/Linux systems via HiperSockets. We have a request for > about 20 more z/Linux guests all of which will have two HiperSockets > CHPIDs (3 UCBS per guest off of the different CHPIDS). The issue is that > I am using pretty much the max number of UCBs allowed. So I was > wondering what folks are doing when they have these requirements but are > at the max of allowable addresses within the HiperSockets CHPIDs. I know > that I can share the spanned HiperSockets CHPIDs across different LPARS > using the same UCBs as the other LPARS as long as I do not re-use them > on the same LPAR I am ok. So maybe the way to go is to create another > LPAR or two I don't know? Any help would be appreciated. > > > > Thank You, > > > > Terry Martin > > Lockheed Martin - Citic > > z/OS and z/VM Performance Tuning and Operating Systems Support > > Office - 443 348-2102 > > Cell - 443 632-4191 > > > > > > > > -- Dave Jones V/Soft www.vsoft-software.com Houston, TX 281.578.7544
