I'm attempting to bring up our VM system under 2nd level at the DR site. The problem that I'm running into is:
08:58:10 HCPZCO6718I Using parm disk 1 on volume 610RES (device 06F8) 08:58:10 HCPZCO6718I Parm disk resides on cylinders 39 through 158. 08:58:10 Start ((Warm|Force|COLD|CLEAN) (DRain) (DIsable) (NODIRect) 08:58:10 (NOAUTOlog)) or (SHUTDOWN) H HCPSED6013A A CP read is pending. The HCPSED6013A seems to be the problem. At our site, I have two VMs that I can IPL under our z/VM 5.4. One will IPL just fine (i.e. no HCPSED6013A) the other doesn't' and displays this message. Both VMs are configured (DIRECT) the same. I'm at a loss as to why this happens with one and not the other. We had no problems during the last DR, but we've applied z/VM 5.4 maintenance since then (1003). Ideas? Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.