That's because your console address is not 1.  From you running system do:

 

Q OPERATOR

 

The oPerator console address is your console address or from your system
config operator console statement.  And, do give loadparm.

 

Define 9 xxx (the console address)

Term mode 3270

IPL xxxx

Tom

1-646-452-3359

 

From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Frank M. Ramaekers
Sent: Monday, June 20, 2011 9:41 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Problems at DR test

 

I'm getting 'HCPCLT1013E An invalid operand was supplied for LOADPARM -
CONS-0001.

 

 


Frank M. Ramaekers Jr.

 

 

  _____  

From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On
Behalf Of Kris Buelens
Sent: Monday, June 20, 2011 8:12 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: Problems at DR test

 

You z/VM system didn't find a 3270 console, so it is using the "System
console"  As you run second level, you an respond to VM questions using
   #CP VINPUT VMSG xxxx
To make it easier:
before you IPL, issue
   CP Q V CONS
   note the address, often 009
   CP TERM CONMODE 3270
   CP IPL xxxx LOADPARM CONS=yyyy
(xxxx is the disk your VM resident is on; yyyy is the address you found in Q
V CONS)

2011/6/20 Frank M. Ramaekers <framaek...@ailife.com>

I'm attempting to bring up our VM system under 2nd level at the DR site.
The problem that I'm running into is:

 

08:58:10 HCPZCO6718I Using parm disk 1 on volume 610RES (device 06F8)

08:58:10 HCPZCO6718I Parm disk resides on cylinders 39 through 158.  

08:58:10 Start ((Warm|Force|COLD|CLEAN) (DRain) (DIsable)  (NODIRect)

08:58:10       (NOAUTOlog)) or (SHUTDOWN)                            

H HCPSED6013A A CP read is pending.                                  

 

The HCPSED6013A seems to be the problem.  At our site, I have two VMs that I
can IPL under our z/VM 5.4.   One will IPL just fine (i.e. no HCPSED6013A)
the other doesn't' and displays this message.  Both VMs are configured
(DIRECT) the same.  I'm at a loss as to why this happens with one and not
the other.

 

We had no problems during the last DR, but we've applied z/VM 5.4
maintenance since then (1003).

 

Ideas?

 

 


 Frank M. Ramaekers Jr.

 

Image removed by sender.


Systems Programmer

MCP, MCP+I, MCSE & RHCE

 


American Income Life Insurance Co.

Phone: (254)761-6649

 


1200 Wooded Acres Dr.

Fax: (254)741-5777

 


Waco, Texas  76701

 

 

 

_____________________________________________________ This message contains
information which is privileged and confidential and is solely for the use
of the intended recipient. If you are not the intended recipient, be aware
that any review, disclosure, copying, distribution, or use of the contents
of this message is strictly prohibited. If you have received this in error,
please destroy it immediately and notify us at privacy...@ailife.com. 




-- 
Kris Buelens,
IBM Belgium, VM customer support

_____________________________________________________ This message contains
information which is privileged and confidential and is solely for the use
of the intended recipient. If you are not the intended recipient, be aware
that any review, disclosure, copying, distribution, or use of the contents
of this message is strictly prohibited. If you have received this in error,
please destroy it immediately and notify us at privacy...@ailife.com. 

Reply via email to