|
There are some other things you can try before
running the Init, search the archives from last week. But, your best
bet is to contact technical support so someone can talk you through the problem
you are having.
There is a command line utilty that can convert the
LDAP database from old format to new. Support can give you further details
on that, but it is not mandatory to run LDAP.
Tripp
----- Original Message -----
Sent: Tuesday, April 13, 2004 8:27
AM
Subject: RE: [IMail Forum] IMail 8.10
Imail Administrator Problem
Hi,
LDAP
init tried to restart the service which failed. Then after i read some more
posts I changed the port of LDAP from 389 to 400 and LDAP
started.
Now
the Imail Administrator works dead slow when i click on any user to see it's
properties. At times it shows not responding.
i
tried to do the init of LDAP and its still dead slow.
(unusable)
Also
my biggest question is, how do i go about updating a live server that has
thousands of users? It is not currently running the LDAP service
(stopped).
Regards,
Alexander
Spiteri
NextGen.net Ltd.
Tel : (+356) 21419109
Fax : (+356)
21438948
Url: <http://www.nextgen.net.mt> - Internet Service
Url: <http://www.softmedia.com.mt> - Software, Web Design and Hosting
Url: <http://www.nextgen.com.mt> - Computer Hardware and Support
Try to perform an LDAP Init from the LDAP
services tab.
Tripp
----- Original Message -----
Sent: Tuesday, April 13, 2004 6:11
AM
Subject: RE: [IMail Forum] IMail 8.10
Imail Administrator Problem
HI,
Thanks for the explanation. We tried to start the LDAP server and
it gave the following error in the event log :
The
description for Event ID ( 1281 ) in Source ( OpenLDAP-slapd ) cannot be
found. The local computer may not have the necessary registry information
or message DLL files to display messages from a remote computer. You may
be able to use the /AUXSOURCE= flag to retrieve this description; see Help
and Support for details. The following information is part of the event:
.
What should we do?
The User Attributes (organization,
department, address, city, state/province, postal code, country,
telephone) are stored in LDAP. In IMail 8.05 and earlier, IMail
had access to this database even though the LDAP server wasn't
running. In 8.1, IMail started using Open LDAP. IMail only
has access to this data through the LDAP server, so if it's not running
IMail can't get the data.
Tripp
----- Original Message -----
Sent: Monday, April 12, 2004 9:23
AM
Subject: [IMail Forum] IMail 8.10
Imail Administrator Problem
We have
the same problem when reading external Databases, while emails work
fine the administrator only allows editing of 3 fields. Before
updating to Imail 8.10 all was ok.
Fields
which allow editing. (Other are grayed out)
password
reply
to
forward
We do not
use LDAP, however now we are seeing the notice **LDAP server is not
running**
|
