I've just received my new PVR-500 from Hauppauge. The markings on the card say "MultiPAL 23559, Rev D596"
The output of dmesg is as follows: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.0 (tagged release) loading ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 0070/f7f7 ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: This is the second unit of a PVR500 ivtv0: Correcting tveeprom data: no radio present on second unit tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: Initialized WinTV PVR 500 (unit #2), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Unknown card: vendor/device: 4444/0016 ivtv1: subsystem vendor/device: 0070/f7f7 ivtv1: cx23416 based ivtv1: Defaulting to Hauppauge WinTV PVR-150 card ivtv1: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv1: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv1: Prefix your subject line with [UNKNOWN CARD]. ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video1 for encoder MPEG ivtv1: Registered device video33 for encoder YUV ivtv1: Registered device vbi1 for encoder VBI ivtv1: Registered device video25 for encoder PCM audio ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== Can you help? _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
