On Mon, Nov 13, 2006 at 01:30:45PM -0500, Hans Verkuil wrote: > For the record: it will work just fine as is. You can ignore these > warnings.
The "firmware loaded" messages for the cx25840s seem to be missing, however. > On Monday 13 November 2006 19:13, Simon Baxter wrote: > > I've just received my new PVR-500 from Hauppauge. > > > > The markings on the card say "MultiPAL 23559, Rev D596" > > > > The output of dmesg is as follows: > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.8.0 (tagged release) loading > > ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM > > 4KSTACKS gcc-4.1 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: Unknown card: vendor/device: 4444/0016 > > ivtv0: subsystem vendor/device: 0070/f7f7 > > ivtv0: cx23416 based > > ivtv0: Defaulting to Hauppauge WinTV PVR-150 card > > ivtv0: Please mail the vendor/device and subsystem vendor/device IDs > > and what kind of > > ivtv0: card you have to the ivtv-devel mailinglist > > (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN > > CARD]. > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: This is the second unit of a PVR500 > > ivtv0: Correcting tveeprom data: no radio present on second unit > > tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > > tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) > > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Registered device video0 for encoder MPEG > > ivtv0: Registered device video32 for encoder YUV > > ivtv0: Registered device vbi0 for encoder VBI > > ivtv0: Registered device video24 for encoder PCM audio > > ivtv0: Initialized WinTV PVR 500 (unit #2), card #0 > > ivtv: ====================== NEXT CARD ====================== > > ivtv1: Unknown card: vendor/device: 4444/0016 > > ivtv1: subsystem vendor/device: 0070/f7f7 > > ivtv1: cx23416 based > > ivtv1: Defaulting to Hauppauge WinTV PVR-150 card > > ivtv1: Please mail the vendor/device and subsystem vendor/device IDs > > and what kind of > > ivtv1: card you have to the ivtv-devel mailinglist > > (www.ivtvdriver.org) ivtv1: Prefix your subject line with [UNKNOWN > > CARD]. > > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) > > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) > > ivtv1: This is the second unit of a PVR500 > > ivtv1: Correcting tveeprom data: no radio present on second unit > > ivtv1: Encoder revision: 0x02050032 > > ivtv1: Registered device video1 for encoder MPEG > > ivtv1: Registered device video33 for encoder YUV > > ivtv1: Registered device vbi1 for encoder VBI > > ivtv1: Registered device video25 for encoder PCM audio > > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 > > ivtv: ==================== END INIT IVTV ==================== > > > > > > Can you help? > > > > > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > -- Tyler Trafford _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
