For the record: it will work just fine as is. You can ignore these
warnings.
Hans
On Monday 13 November 2006 19:13, Simon Baxter wrote:
> I've just received my new PVR-500 from Hauppauge.
>
> The markings on the card say "MultiPAL 23559, Rev D596"
>
> The output of dmesg is as follows:
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.8.0 (tagged release) loading
> ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM
> 4KSTACKS gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Unknown card: vendor/device: 4444/0016
> ivtv0: subsystem vendor/device: 0070/f7f7
> ivtv0: cx23416 based
> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs
> and what kind of
> ivtv0: card you have to the ivtv-devel mailinglist
> (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN
> CARD].
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: This is the second unit of a PVR500
> ivtv0: Correcting tveeprom data: no radio present on second unit
> tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Registered device video0 for encoder MPEG
> ivtv0: Registered device video32 for encoder YUV
> ivtv0: Registered device vbi0 for encoder VBI
> ivtv0: Registered device video24 for encoder PCM audio
> ivtv0: Initialized WinTV PVR 500 (unit #2), card #0
> ivtv: ====================== NEXT CARD ======================
> ivtv1: Unknown card: vendor/device: 4444/0016
> ivtv1: subsystem vendor/device: 0070/f7f7
> ivtv1: cx23416 based
> ivtv1: Defaulting to Hauppauge WinTV PVR-150 card
> ivtv1: Please mail the vendor/device and subsystem vendor/device IDs
> and what kind of
> ivtv1: card you have to the ivtv-devel mailinglist
> (www.ivtvdriver.org) ivtv1: Prefix your subject line with [UNKNOWN
> CARD].
> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1)
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
> ivtv1: This is the second unit of a PVR500
> ivtv1: Correcting tveeprom data: no radio present on second unit
> ivtv1: Encoder revision: 0x02050032
> ivtv1: Registered device video1 for encoder MPEG
> ivtv1: Registered device video33 for encoder YUV
> ivtv1: Registered device vbi1 for encoder VBI
> ivtv1: Registered device video25 for encoder PCM audio
> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> ivtv: ==================== END INIT IVTV ====================
>
>
> Can you help?
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
