Thanks! ----- Original Message ----- From: "Hans Verkuil" <[EMAIL PROTECTED]> To: "Discussion list for development of the IVTV driver" <[email protected]> Sent: Monday, November 13, 2006 10:25 AM Subject: Re: [ivtv-devel] UNKNOWN CARD
> FYI, ivtv-0.8 from svn will recognize it properly. I hope to have a new > ivtv-0.8.1 release next weekend. > > Regards, > > Hans > > On Monday 13 November 2006 19:13, Simon Baxter wrote: >> I've just received my new PVR-500 from Hauppauge. >> >> The markings on the card say "MultiPAL 23559, Rev D596" >> >> The output of dmesg is as follows: >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.8.0 (tagged release) loading >> ivtv: Linux version: 2.6.18-1.2200.fc5 mod_unload 686 REGPARM >> 4KSTACKS gcc-4.1 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Unknown card: vendor/device: 4444/0016 >> ivtv0: subsystem vendor/device: 0070/f7f7 >> ivtv0: cx23416 based >> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card >> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs >> and what kind of >> ivtv0: card you have to the ivtv-devel mailinglist >> (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN >> CARD]. >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv0: This is the second unit of a PVR500 >> ivtv0: Correcting tveeprom data: no radio present on second unit >> tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) >> tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) >> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) >> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Registered device video0 for encoder MPEG >> ivtv0: Registered device video32 for encoder YUV >> ivtv0: Registered device vbi0 for encoder VBI >> ivtv0: Registered device video24 for encoder PCM audio >> ivtv0: Initialized WinTV PVR 500 (unit #2), card #0 >> ivtv: ====================== NEXT CARD ====================== >> ivtv1: Unknown card: vendor/device: 4444/0016 >> ivtv1: subsystem vendor/device: 0070/f7f7 >> ivtv1: cx23416 based >> ivtv1: Defaulting to Hauppauge WinTV PVR-150 card >> ivtv1: Please mail the vendor/device and subsystem vendor/device IDs >> and what kind of >> ivtv1: card you have to the ivtv-devel mailinglist >> (www.ivtvdriver.org) ivtv1: Prefix your subject line with [UNKNOWN >> CARD]. >> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) >> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) >> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) >> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) >> ivtv1: This is the second unit of a PVR500 >> ivtv1: Correcting tveeprom data: no radio present on second unit >> ivtv1: Encoder revision: 0x02050032 >> ivtv1: Registered device video1 for encoder MPEG >> ivtv1: Registered device video33 for encoder YUV >> ivtv1: Registered device vbi1 for encoder VBI >> ivtv1: Registered device video25 for encoder PCM audio >> ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 >> ivtv: ==================== END INIT IVTV ==================== >> >> >> Can you help? >> >> >> _______________________________________________ >> ivtv-devel mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
