Hi there,
there is nothing rong with this file! the file you want to look att is the
autoexc.bat file and see what is entered in this file! you don't want the
drivers loded so take out the dtexp cd line
pluss the call line out.. this may be the bottom lines of the autexect.bat
file then install jfw again using the dectalk express drivers of henter
joices, the drivers you have installed are the dos drivers and wont work in
windows, but there is no need to remove them incase you want to use jaws
for dos, you can make a new batch file to load the dos drivers up in dos
for this, so leave them there they are useful..
Hope this Helps..
Chris Cant..
At 17:08 28/01/99 -0500, you wrote:
>Hello listers:
>
>I have installed the dectalk driver in my pc on com2 under custom
>installation.The default for dectalk express is on com1.
>After I install the drv, I reboot the computer.
>Then, dectalk synth start to talk saying: "dectalk drv 4/c installed."
>
>However, after few second, I was expecting my computer to start win98.
>But, there is no speech from JFW. Here is below I put the dtexp.bat for
>anyone to help me what to do in this regard.
>
>rem copyright (c)1996 Digital Equipment Corporation all rights reserved
>@echo off
>cls
>dt_driv -r > NUL
>echo DECtalk Express in self-test, please wait.
>echo.
>dt_driv -c -i 3 -b 2F8 > NUL
>dt_driv -c -i 3 -b 2F8 > NUL
>debug < c2.dbg > NUL
>dtstart "DECtalk Express is connected running version 4.2C. [:power
interval 30]
>if errorlevel 1 goto notsr
>echo The DECtalk Express is connected.
>goto end
>:notsr
>echo Please be sure the unit is turned ON and connected to your PC.
>echo.
>:end
>
>-
>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>
>
Chris Cant
of Second sight Picture framing service,
order your Pictur frames from me!
voice 44 01482 564199
ICQ number 22635936
-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
