Hello again!
I don't have problem when I am going to the windows environment. JFW3/2
is recognizing and running well with the dectalk express.
However, when I am trying to go dos in window mode, no speech at all.
In the mean time, I have to rem the dectalk drv calling file in the
autoexec.bat. other wise, my computer locks up after the dectalk driver
has loaded.
I want to use my dos reader either JFD or vocal-eyes from window dos box.
But, I couldn't do it.
Thank you in advance.
Regards,
Tam.
On Thu, 28 Jan 1999, chris cant wrote:
> Date: Thu, 28 Jan 1999 23:20:06 +0000
> From: chris cant <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: dectalk driver
>
> Hi there,
> there is nothing rong with this file! the file you want to look att is the
> autoexc.bat file and see what is entered in this file! you don't want the
> drivers loded so take out the dtexp cd line
> pluss the call line out.. this may be the bottom lines of the autexect.bat
> file then install jfw again using the dectalk express drivers of henter
> joices, the drivers you have installed are the dos drivers and wont work in
> windows, but there is no need to remove them incase you want to use jaws
> for dos, you can make a new batch file to load the dos drivers up in dos
> for this, so leave them there they are useful..
>
> Hope this Helps..
>
> Chris Cant..
>
> At 17:08 28/01/99 -0500, you wrote:
> >Hello listers:
> >
> >I have installed the dectalk driver in my pc on com2 under custom
> >installation.The default for dectalk express is on com1.
> >After I install the drv, I reboot the computer.
> >Then, dectalk synth start to talk saying: "dectalk drv 4/c installed."
> >
> >However, after few second, I was expecting my computer to start win98.
> >But, there is no speech from JFW. Here is below I put the dtexp.bat for
> >anyone to help me what to do in this regard.
> >
> >rem copyright (c)1996 Digital Equipment Corporation all rights reserved
> >@echo off
> >cls
> >dt_driv -r > NUL
> >echo DECtalk Express in self-test, please wait.
> >echo.
> >dt_driv -c -i 3 -b 2F8 > NUL
> >dt_driv -c -i 3 -b 2F8 > NUL
> >debug < c2.dbg > NUL
> >dtstart "DECtalk Express is connected running version 4.2C. [:power
> interval 30]
> >if errorlevel 1 goto notsr
> >echo The DECtalk Express is connected.
> >goto end
> >:notsr
> >echo Please be sure the unit is turned ON and connected to your PC.
> >echo.
> >:end
> >
> >-
> >Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
> >
> >
> Chris Cant
>
> of Second sight Picture framing service,
>
> order your Pictur frames from me!
> voice 44 01482 564199
>
> ICQ number 22635936
> -
> Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>
-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
