I tried totally disabling ANSI fcharacters, and it didn't change a
thing.
On Wed, 02 Jun 1999 10:11:56 -0400, you wrote:
>Hi David,
> I am still hammering at this DECtalk PC word split problem. I
>talked to HJ about this and didn't get too far. He suggested that we
>go to the defalt config manager, settings, graphics and turn off all
>ANSI charactors. That will solve the acute high ANSI charactor
dectalk
>crash problem. It did not solve the word split problem. He asked if
>the problem was acurring on mixed case words and I noted that mixed
>case processing was checked in defalt config and that was not the
>case. You can watch the problem happen on a word, run the cursor
>back over the word and it will say it correctly.
>I have tried some changes in text delay and frequency and have not
>seen any measurable change in the frequency of the problem. My
>vender finally called back and suggested that there were a number of
>DECtalk PC drivers around these days and he thought that
>Arkenstone had a stable SSIL driver for Dectalk PC to download from
>there site. Hopefully, if all of us DECtalk PC users hammer at
>this and make enough noise, we will get a solution. There are enough
>of us reporting this problem to indicate that there is some sort of
>enstability with Dectalk drivers and it seems to have been agrivated
a
>bit by JFW 3.3.25.
>My vender also said that the Pc2v42cd.exe driver is only a beta and I
>should be using the pc2v42c.exe driver. Talk about confusing!
> As always, thank you for your input. Respectfully, Karkey
>David Poehlman wrote:
>>
>> try 0 for the frequency reset?
>>
>> Walter Siren wrote:
>> >
>> > I have tried changing the text out delay to 0, but that did not
make any
>> > difference, So I just now change the frequency under synthesizers
to 1000,
>> > I will se if that makes any difference. Well, it did not make
any
>> > difference, I even tried 100, then 3000, and none of them made
any difference.
>> > At 02:03 PM 6/1/99 -0400, you wrote:
>> > >it is text out delay under advanced settings in the config
manager and
>> > >under synthesizer it is frequency reset.
>> > >--
>> > >Hands-On Technolog(eye)s
>> > >Touching The Internet:
>> > >mailto:[EMAIL PROTECTED]
>> > >Voice: 301.949.7599
>> > >ftp://ftp.clark.net/pub/poehlman
>> > >http://poehlman.clark.net
>> > >Dynamic Solutions Inc.
>> > >Best of service
>> > >for your small business
>> > >network needs!
>> > >http://www.dnsolutions.com
>> > >
>> > >---sig off---
>> > >-
>> > >Visit the jfw ml web page: http://jfw.cjb.net
>> > >
>> > >
>> > Walter
>> > -
>> > Visit the jfw ml web page: http://jfw.cjb.net
>>
>> --
>> Hands-On Technolog(eye)s
>> Touching The Internet:
>> mailto:[EMAIL PROTECTED]
>> Voice: 301.949.7599
>> ftp://ftp.clark.net/pub/poehlman
>> http://poehlman.clark.net
>> Dynamic Solutions Inc.
>> Best of service
>> for your small business
>> network needs!
>> http://www.dnsolutions.com
>>
>> ---sig off---
>> -
>> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
