yes, turning off ansi can solve the crash problem. I remember a few
versions back where a synth was broken by a jfw upgrade. perhaps this
is an issue to be escalated through hj.
Thanks for the report and contimued work on this.
Karkey wrote:
>
> Hi David,
> I am still hammering at this DECtalk PC word split problem. I
> talked to HJ about this and didn't get too far. He suggested that we
> go to the defalt config manager, settings, graphics and turn off all
> ANSI charactors. That will solve the acute high ANSI charactor dectalk
> crash problem. It did not solve the word split problem. He asked if
> the problem was acurring on mixed case words and I noted that mixed
> case processing was checked in defalt config and that was not the
> case. You can watch the problem happen on a word, run the cursor
> back over the word and it will say it correctly.
> I have tried some changes in text delay and frequency and have not
> seen any measurable change in the frequency of the problem. My
> vender finally called back and suggested that there were a number of
> DECtalk PC drivers around these days and he thought that
> Arkenstone had a stable SSIL driver for Dectalk PC to download from
> there site. Hopefully, if all of us DECtalk PC users hammer at
> this and make enough noise, we will get a solution. There are enough
> of us reporting this problem to indicate that there is some sort of
> enstability with Dectalk drivers and it seems to have been agrivated a
> bit by JFW 3.3.25.
> My vender also said that the Pc2v42cd.exe driver is only a beta and I
> should be using the pc2v42c.exe driver. Talk about confusing!
> As always, thank you for your input. Respectfully, Karkey
> David Poehlman wrote:
> >
> > try 0 for the frequency reset?
> >
> > Walter Siren wrote:
> > >
> > > I have tried changing the text out delay to 0, but that did not make any
> > > difference, So I just now change the frequency under synthesizers to 1000,
> > > I will se if that makes any difference. Well, it did not make any
> > > difference, I even tried 100, then 3000, and none of them made any difference.
> > > At 02:03 PM 6/1/99 -0400, you wrote:
> > > >it is text out delay under advanced settings in the config manager and
> > > >under synthesizer it is frequency reset.
> > > >--
> > > >Hands-On Technolog(eye)s
> > > >Touching The Internet:
> > > >mailto:[EMAIL PROTECTED]
> > > >Voice: 301.949.7599
> > > >ftp://ftp.clark.net/pub/poehlman
> > > >http://poehlman.clark.net
> > > >Dynamic Solutions Inc.
> > > >Best of service
> > > >for your small business
> > > >network needs!
> > > >http://www.dnsolutions.com
> > > >
> > > >---sig off---
> > > >-
> > > >Visit the jfw ml web page: http://jfw.cjb.net
> > > >
> > > >
> > > Walter
> > > -
> > > Visit the jfw ml web page: http://jfw.cjb.net
> >
> > --
> > Hands-On Technolog(eye)s
> > Touching The Internet:
> > mailto:[EMAIL PROTECTED]
> > Voice: 301.949.7599
> > ftp://ftp.clark.net/pub/poehlman
> > http://poehlman.clark.net
> > Dynamic Solutions Inc.
> > Best of service
> > for your small business
> > network needs!
> > http://www.dnsolutions.com
> >
> > ---sig off---
> > -
> > Visit the jfw ml web page: http://jfw.cjb.net
>
> --
> Professional Live Entertainment (Keyboards/Vocals)
> Single - Duo - Multi-piece
> Composition, Arranging and 24 track Recording
> Jingles / Demos
> Voice Mail: 941-823-4593
> [EMAIL PROTECTED]
> rkenstone
> -
> Visit the jfw ml web page: http://jfw.cjb.net
--
Hands-On Technolog(eye)s
Touching The Internet:
mailto:[EMAIL PROTECTED]
Voice: 301.949.7599
ftp://ftp.clark.net/pub/poehlman
http://poehlman.clark.net
Dynamic Solutions Inc.
Best of service
for your small business
network needs!
http://www.dnsolutions.com
---sig off---
-
Visit the jfw ml web page: http://jfw.cjb.net
