> Date: Wed, 12 Aug 2009 12:19:41 -0400 > From: Brendan Mannella <[email protected]> > Sender: [email protected] > > Hello, > > I was wondering if anyone has successfully replaced a hard disk on a M7i > RE-5.0. If so with what model disk, and once installed what is the procedure > to get the disk back to working/formatted condition.
No magic involved. Just replace it with a disk of the same or greater capacity. Be sure it's one rated for continuous operation, not a standard laptop drive. (This will make the drive a lot more expensive!) Then just "request system snapshot partition" for format, partition, load the drive. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: [email protected] Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
