Kevin Oberman wrote:
Date: Wed, 12 Aug 2009 12:19:41 -0400
From: Brendan Mannella <bmanne...@teraswitch.com>
Sender: juniper-nsp-boun...@puck.nether.net
Hello,
I was wondering if anyone has successfully replaced a hard disk on a M7i
RE-5.0. If so with what model disk, and once installed what is the procedure
to get the disk back to working/formatted condition.
No magic involved. Just replace it with a disk of the same or greater
capacity. Be sure it's one rated for continuous operation, not a
standard laptop drive. (This will make the drive a lot more expensive!)
Then just "request system snapshot partition" for format, partition, load
the drive.
Make sure the jumper on the drive is set to "slave" mode.
- Kevin
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
