I recommend using SSD's, see: http://juniper.cluepon.net/index.php/Replacing_the_harddisk_with_solid_state_flash
Regards, Jonas > >> Hello, > >> > >> I was wondering if anyone has successfully replaced a hard disk on a M7i > >> RE-5.0. If so with what model disk, and once installed what is the > >> procedure > >> to get the disk back to working/formatted condition. > > > > No magic involved. Just replace it with a disk of the same or greater > > capacity. Be sure it's one rated for continuous operation, not a > > standard laptop drive. (This will make the drive a lot more expensive!) > > > > > > Then just "request system snapshot partition" for format, partition, load > > the drive. > > Make sure the jumper on the drive is set to "slave" mode. > > - Kevin > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp