>Another possible solution, >What about some of the great Model aircraft coverings, >Phil Matheson +++++++++++++++++++++++++++++++++++++++++++++++++++
Why not just make a strip of fiberglass as long and wide as you want. Lay it on plastic or other smooth, non-stick surface for a smooth finish and glass/epoxy it to the bottom side of the wing to cover the gap. If you have to remove the aileron you could undo the aileron pushrod and tip the aileron to the vertical position to get to the hinge attach bolts. A piece of tape on the aileron surface would keep the gap seal from marking the paint. Larry Flesner
