The bolts are .188", indeed. Most brackets that actually get installed on something have clearance around the holes.
I'm just saying, that's the way I did it, and the extra .013" clearance on 8 holes in a rect pattern wasn't a problem. There isn't any "slop" in my brackets installed... And it makes installation a bit easier. Matt ------------------------------------------------- Matthew Elder Orangeburg, SC http://www.infinigral.com/melder My Airplane Project: http://www.infinigral.com/melder/flying/KR1/ ----- Original Message ---- From: Mark Langford <n5...@hiwaay.net> To: KRnet <kr...@mylist.net> Sent: Friday, May 5, 2006 9:50:13 AM Subject: Re: KR> scrounging for parts Matt Elder wrote: > The small holes (for the AN3 bolts) I just cut to .201 dia and then just > ran a .201 drill through to clean them up. Are you sure about that? All of my AN3 bolts are closer to .188" in diameter. I wouldn't want any slop there either... Mark Langford, Huntsville, Alabama see KR2S project N56ML at http://home.hiwaay.net/~langford email to N56ML "at" hiwaay.net _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
