Cannot recollect any drawings for WAF's in the plans, someone told me
there was also a section on sanding the lower longeron flush to fit the
floor, but have never been able to find that section either, will have
another search though, it may be hidden away somewhere which I havent spent
much time perousing through yet. I am surprised how quick it has taken to
get to the "I need WAF's " stage!!!!
Chris Johnston
North Richmond
Australia.
----- Original Message -----
From: "D F Lively" <riksh...@interl.net>
To: "KRnet" <kr...@mylist.net>
Sent: Saturday, May 06, 2006 1:15 AM
Subject: Re: KR> scrounging for parts
> Chris:
>
> The plans should have drawings for the WAF's but mine does not have the
> diameters spelled out for the aft spar holes but they are AN-3 bolts. You
> should be able to get the dimensions of the grip diameters from an AS
> catalog but beware of tolerances as the WAF's on my bird are undersized
> for the bolds I got by a few thousandths and need enlargement so as not to
> be an interferance fit. Probably need to give a look at a good "Fits &
> Clearance" table and go from
> there--- With CARE.
>
> Don
> ------------------------------------------------------------------------
>
> Chris Johnston wrote:
>
>> I am on the scrounge for parts, I need some undercarriage fittings,
>> the Diehl ones for fitting to the spars, if anyone has an old or disused
>> set I would be interested, is the length of the kr2 gear legs the same as
>> the length of the kr2s, and can you make the legs from Aluminium, failing
>> all that, it might be safer just to buy the complete Diehl gear set and
>> be done with it, and yes, I have been very bad in that I have not checked
>> the archives on this.
>> I am also wanting wing attachment fittings, I would think it would be
>> pretty easy to make thses at home, send a cad file to the CNC water jet
>> guy and have them cut out, I am told they can do them here to +/- 2 thou,
>> will the bolt holes need reaming? and what s the best way to do this, fit
>> them in a jig and do them all in one or do them individually????? Any
>> advice greatly appreciated, and yes, again, I have not checked the
>> archives.
>>
>>
>>
>> Chris Johnston
>>
>> North Richmond
>>
>> Australia
>> _______________________________________
>> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
>> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
>> please see other KRnet info at http://www.krnet.org/info.html
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
