Bobby: Sounds good but I can not seem to find one intown to buy---- but I have not tried any of the EAA guys here. It looks like the person that made these used an under sized bit bicause I used a 3/8 " and a 7/64" bit in wood and they were just right! Thanks for the suggestion I'll try a chapter EAA member and see if he has one.
Don ------------------------------------------------------------------------ bo...@hatconversions.com wrote: > Don, Use an adjustable hand reamer. It's lots quicker, and your holes > will > stay round.........Bobby > > > Virgil: > > > > I am back to the Dowel & Emory paper sice the WAF's are already > insyalled > > on > > the closed up wing I can not even use a hand drill let alone a drill > press > > so > > this will take a while. I already had the wings on with ordinary > bolts so > > I > > know they fit that way but they only go on the 1st half of the grip > of the > > bolt at most. > > > > Thanks > > > > Don > > > ------------------------------------------------------------------------ > > > > > VIRGIL N SALISBURY wrote: > > > >> Drill the bolt holes undersized then ream. You do one at a > time, > >> KEEP > >> the reamer square to the work. Put it in the drill press and hand > turn. > >> Lubricate > >> well, Virg > >> > >> On Fri, 5 May 2006 23:00:49 +1000 "Chris Johnston" > >> <chr...@ozdocs.net.au> > >> writes: > >> > I am on the scrounge for parts, I need some undercarriage > >> > fittings, the Diehl ones for fitting to the spars, if anyone has > an > >> > old or disused set I would be interested, is the length of the > kr2 > >> > gear legs the same as the length of the kr2s, and can you make > the > >> > legs from Aluminium, failing all that, it might be safer just to > buy > >> > the complete Diehl gear set and be done with it, and yes, I have > >> > been very bad in that I have not checked the archives on this. > >> > I am also wanting wing attachment fittings, I would think it > >> > would be pretty easy to make thses at home, send a cad file to > the > >> > CNC water jet guy and have them cut out, I am told they can do > them > >> > here to +/- 2 thou, will the bolt holes need reaming? and what s > the > >> > best way to do this, fit them in a jig and do them all in one or > do > >> > them individually????? Any advice greatly appreciated, and yes, > >> > again, I have not checked the archives. > >> > > >> > > >> > > >> > > >> > > >> > Chris Johnston > >> > > >> > North Richmond > >> > > >> > Australia > >> > _______________________________________ > >> > Search the KRnet Archives at > >> > http://www.maddyhome.com/krsrch/index.jsp > >> > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > >> > please see other KRnet info at http://www.krnet.org/info.html > >> > > >> > > >> > >> Virgil N. Salisbury - AMSOIL > >> www.lubedealer.com/salisbury > >> Miami ,Fl > >> > >> _______________________________________ > >> Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > >> please see other KRnet info at http://www.krnet.org/info.html > > _______________________________________ > > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
