I wouldn't put anything on dry. It leaves you open to air pockets under the finish which causes bubbles in the paint later on. Peel ply works and helps remove excess resin.
--- On Tue, 2/16/10, Dan Heath <da...@windstream.net> wrote: From: Dan Heath <da...@windstream.net> Subject: RE: KR> Slick finnish. To: "'KRnet'" <kr...@mylist.net> List-Post: krnet@list.krnet.org Date: Tuesday, February 16, 2010, 4:45 AM I like peel ply. I know it works. If the micro does not wet out, then it will just flake off and you will not have accomplished anything. A quick test on a small piece should tell the tale. Not sure about the "lighter" either as peel ply actually sucks up excess resin, but I will bet we are talking grams here. See N64KR at http://KRBuilder.org - Then click on the pics See you at the 2010 - KR Gathering in Richmond, Ky - I39 There is a time for building and a time for FLYING and the time for Flying has begun. Daniel R. Heath - Lexington, SC -----Original Message----- pour dry micro balloons over the wing and brush it around to fill in the weave. After drying just rake the excess back into the can. He said that this would be lighter than the peelplying method but how much weight are we talking here ? Is there a best way to do this ? Mike Sylvester _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html