At 05:34 AM 7/12/2010, you wrote:
>I was working with the CAD drawings I've done in Rhino for the KR2S and
>I noticed that the outer wing according to plans has a minute amount of
>forward sweep.
>Pete.
>Ballina, Aus.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I think I'd check the software if I were you.  The forward spar is 
perfectly straight from tip to tip.  The wing tappers from the 48 
inch rib to the 36 inch rib at the tip.  I'd have to look at the 
airplane to be sure but I think my plans built wings tapper slightly 
aft from the attach point to the tip or at most, straight.

Larry Flesner



Reply via email to