Sorry, I forgot the straight piece (planing on a wing with straight taper ...)
The correct data is quite similar: The KR2S theoretical wing: wing area of 84 Sq. Ft. WingSpan 23.00 FT. Aspect Ratio 6.3 Taper ratio 0.75 QC Sweep 0.00 Deg. Mean Chord 3.68 Ft. MC Span Location 5.48 Ft. Gunnar On 12.07.2010 15:53, Gunnar Olsen wrote: > For a straight wing tapering from 48 to 36 inches; when quarter chord > sweep is straight, the leading edge of the tip spar is 3 inches behind > the leading edge of the root spar. > > It does not matter where the actual wing spar is located and what angle > it has. ( but I believe on the KR it should be straight as well) > > The KR2S theoretical wing: > > wing area of 80.5 Sq. Ft. > WingSpan 23.00 FT. > Aspect Ratio 6.75 > Taper ratio 0.75 > QC Sweep 0.00 Deg. > Mean Chord 3.51 Ft. > MC Span Location 5.48 Ft. > > > Gunnar > > On 12.07.2010 14:46, Larry&Sallie Flesner wrote: > >> At 05:34 AM 7/12/2010, you wrote: >> >> >>> I was working with the CAD drawings I've done in Rhino for the KR2S and >>> I noticed that the outer wing according to plans has a minute amount of >>> forward sweep. >>> Pete. >>> Ballina, Aus. >>> >>> >> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >> >> I think I'd check the software if I were you. The forward spar is >> perfectly straight from tip to tip. The wing tappers from the 48 >> inch rib to the 36 inch rib at the tip. I'd have to look at the >> airplane to be sure but I think my plans built wings tapper slightly >> aft from the attach point to the tip or at most, straight. >> >> Larry Flesner >> >> >> >> >> _______________________________________ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html >> >> >> >> >> > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > > >
